Longsleeve, pattern №1173

Sizes:

size 38, height 152-158
size 38, height 158-164
size 38, height 164-170
size 40, height 152-158
size 40, height 158-164
size 40, height 164-170
size 40, height 170-176
size 40, height 176-182
size 42, height 152-158
size 42, height 158-164
size 42, height 164-170
size 42, height 170-176
size 42, height 176-182
size 44, height 152-158
size 44, height 158-164
size 44, height 164-170
size 44, height 170-176
size 44, height 176-182
size 46, height 152-158
size 46, height 158-164
size 46, height 164-170
size 46, height 170-176
size 46, height 176-182
size 48, height 152-158
size 48, height 158-164
size 48, height 164-170
size 48, height 170-176
size 48, height 176-182
size 50, height 152-158
size 50, height 158-164
size 50, height 164-170
size 50, height 170-176
size 50, height 176-182
size 52, height 152-158
size 52, height 158-164
size 52, height 164-170
size 52, height 170-176
size 52, height 176-182
size 54, height 152-158
size 54, height 158-164
size 54, height 164-170
size 54, height 170-176
size 54, height 176-182
size 56, height 152-158
size 56, height 158-164
size 56, height 164-170
size 56, height 170-176
size 56, height 176-182
size 58, height 152-158
size 58, height 158-164
size 58, height 164-170
size 58, height 170-176
size 58, height 176-182
size 60, height 158-164
size 60, height 164-170
size 60, height 170-176
size 60, height 176-182
size 62, height 158-164
size 62, height 164-170
size 62, height 170-176
size 62, height 176-182
-

Size:

Height:

152-158
158-164
164-170
170-176
176-182

After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".

Info

Comments

Questions

Pattern of a longsleeve. Fitted, slim long-sleeve top with hip length. The bust dart is transferred into the upper part of the side edge of the front. Depending on the selected size, the dart may be stitched or eased. We recommend to ease the dart in sizes from 38 up to 46 and to stitch the dart in sizes from 48 up to 62. The sleeves are set-in, one-seam, below wrist. Polo neck with attached plackets fastens with 4 sewn buttonholes and 4 buttons. The end of the opening is above the chest line. The neckline is round, finished with a roll collar with a cut-on collar stand. Collar attachment point matches with placket edges (Version 1). Collar attachment point matches with centres of the plackets (Version 2).

Eases added to a pattern, cm: Bust-line: minus 10,0 cm. Waist-line: 0,0 cm (for all height in the sizes 38-48); 2,0 cm (for all height in the sizes 50-62). Hips-line: minus 9,8 cm. Shoulders: 0,0 cm.

Please, note, the garment is fitted and it was designed with a negative ease. Use fabrics with sufficient stretch.

Garment Length Measurements, cm:

Size	38	40	42	44	46	48	50	52	54	56	58	60	62
Finished back length along the center back	55,3-58,5	55,3-61,7										56,9-61,7	57,3-61,7
Finished sleeve length	50,8-54,6	51,0-58,5	51,2-58,7	51,4-58,9	51,6-59,1	51,8-59,3	52,0-59,5	52,2-59,7	52,4-50,9	52,4-59,9	52,5-60,0	54,3-60,0	54,5-60,1

Fabric suggestion:

Main and embellishment fabrics

We recommend using TWO MATCHING FABRICS for this garment.

As a MAIN FABRIC we recommend knitted fabrics with a stretch factor of 0.70-0.75, which are soft, flowy and mid-weight. The fabric may be made out of natural (wool, cotton, silk), artificial (viscose, modal), synthetic or blended fibre. For example: knitted wide-rib jersey.

Please, note, the garment is fitted and it was designed with a negative ease. Use fabrics with sufficient stretch.

For the EMBELLISHMENT, for constructing the plackets and the collar, we recommend using bouncy mid-weight or heavy-weight knits. The fabric may be made out of natural (wool, cotton, silk), artificial (viscose, modal), synthetic or blended fibre. For example: ponte knit.

Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 18 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.

Amount of Fabrics (in metres):

Size	38	40	42	44	46	48	50	52	54	56	58	60	62
Main fabric, wide 140 cm	0,70-0,75	0,70-0,80			0,85-0,90	1,00-1,10	1,05-1,20	1,10-1,25	1,10-1,25	1,15-1,30	1,20-1,40	1,30-1,40
Main fabric, wide 180 cm	0,70-0,75	0,70-0,80				0,75-0,80					0,80-0,85	0,90-0,95	0,95-1,05
Embellishment fabric, wide 140/180 cm	0,30
Interfacing (density 18 g/m2; width 150 cm)	0,30
Twilled tape, 7-13 mm wide	0,45			0,50
Silicone tape, wide 6-8 mm	0,25								0,30

Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Accessories: Buttons 10-14 mm - 4 pcs (Option 2).

Pattern is given with seam allowances.

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - "Intermediate".

The photos shows a longsleeve sewed at the GRASSER for pattern №1173.

Model is wearing a size 42. Model parameters: Bust-line: 85 cm, Waist-line: 64 cm, Hips: 93 cm, Height: 174 cm.

The photo also shows: trousers on pattern №1141, skirt on pattern №1103, jacket on pattern №1154, skirt on pattern №1158, skirt on pattern №1175.

For sewing you will need the following equipment:

1.         Multipurpose sewing machine;
2.       4 thread overlock machine;
3.       An iron with or without steam;
4.       Regular presser foot;
5.       A coverstitch machine (if desired);
6.       Wooden iron;
7.       Ironing desk or console table;
8.       Hand needle for basting;
9.       Machine needles Stretch or Super Stretch №80;
10.    Paper scissors;
11.      Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter.

A test square for checking the plotter scale is located on the pattern sheet.

All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.