Trench coat, pattern №1061

Sizes:

size 38-42, height 152-164
size 38-42, height 164-170
size 38-42, height 170-182
size 44-48, height 152-164
size 44-48, height 164-170
size 44-48, height 170-182
size 50-54, height 152-164
size 50-54, height 164-170
size 50-54, height 170-182
size 56-62, height 152-164
size 56-62, height 164-170
size 56-62, height 170-182
-

Size:

38-42
44-48
50-54
56-62

Height:

152-164
164-170
170-182

$11

After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".

Info

Comments

Questions

Trench coat pattern. Loose fit, straight lined trench coat. It is completed with a detachable insulated lining. The garment’s length is below the hip line. The garment’s centre front closure is dislocated and has three rows of buttons and buttonholes. The front pieces feature storm flaps and jetted pockets. The pockets have a welt and a flap and they are fastened with a button and a buttonhole. The storm flaps are buttoned. The back is designed with a centre seam. The back is complemented with a storm flap. Elongated raglan sleeves are designed with three seams - upper seam, lower seam and elbow seam. Tailored detachable epaulettes are placed over the shoulder line on top of the sleeve. The epaulettes are inserted into one shoulder loop and fastened with a button. A detachable strap is designed to adjust the width of the sleeve hem. The strap is threaded through 3 loops, fastened with a button and it is placed 5 cm above the hem edge. Notched collar with a separate collar stand. The neckline is cut up to the waistline. The waistline on the pattern is 6.0 cm lower than the natural waistline. The belt loops are lowered as well. A detachable belt is added to the garment. The belt is inserted into two belt loops sewn at the side seams. The belt is made in two versions. A belt with pointy ends (version 1). A belt with a buckle. A keeper loop is sewn on the inner side of the belt near the buckle. Three straps with D-rings are added to the lower edge of the belt (Version 2). The lining is detachable, insulated with sleeves. The lining is attached to the shell with 23 button loops and 23 buttons. The lining is 3 cm shorter than the shell.

Eases added to a pattern, cm:

Bust-line – 54,0 cm. Hips-line – 50,0 cm. Shoulders – 38,7 cm.

Garment Length Measurements, cm:

Size	Обозначение на чертеже	38-42	44-48	50-54	56-60
Volume at bust: measure at the armhole level (circumference)	А	130,0	142,0	154,0	166,0
Finished back length along the center back seam	В	82,6 - 92,6	83,0- 93,0	83,4 – 93,4	83,8-93,8
Finished sleeve length from neckline	С	75,1 - 82,3	76,4 – 83,6	77,7 – 84,9	79,0-86,2
Width of the sleeve at hem (circumference)	D	47,6	50,0	52,4	54,8

Fabric suggestion:

Main fabric. For this garment we recommend using twill fabrics with or without various coatings with or without waterproof surface of different weights and textures. The fabric can be natural, synthetic or blended.

Lining material. As a lining use the fabrics with density and plasticity suitable for the shell fabric, made out of natural, synthetic or blended fibre.

Insulation. For the garment’s insulation we recommend using Wollwatteline VTL woollen interlining, wool 70%, viscose 30%, weight 200 gsm.

Interfacing materials. For a higher quality result we recommend using iron-on woven interfacing, iron-on or sew-on non-woven interfacing. Iron-on woven interfacing materials 18 gsm and 55 gsm 150 cm wide are re¬quired for the garment’s pieces interfacing. Select the right weight of the interfacing depending on your main fabric’s weight.

The following interfacing is recommended:

— Non-woven iron-on interfacing 30 gsm.

— Non-woven sew-on interfacing 60 gsm.

Amount of Fabrics (in metres):

Size	38-42	44-48	50-54	56-60
TRENCH COAT:
Main fabric, wide 140 cm	3,40-3,60	3,60-3,80	3,85-4,00	4,00-4,25
Lining fabric, wide 140 cm	1,70-1,90	1,80-2,00	2,00-2,20	2,05-2,30
Interfacing (density 55 g/m2; width 150 cm)	1,10-1,20	1,10-1,20	1,15-1,20	1,15-1,20
Interfacing (density 18 g/m2; width 150 cm)	0,20
Non-woven iron-on interfacing 30 gsm, width 90 cm	0,10
Non-woven sew-on interfacing 60 gsm, width 105 cm	0,25
DETACHABLE INSULATED LINING:
Lining fabric, wide 140 cm	3,20-3,55	3,55-3,85	3,85-4,30	4,05-4,50
Insulation material (200 g/m2; width 140 cm)	2,25-2,50	2,30-2,60	2,40-2,65	2,55-2,85
A hat cord (for loops), width 2 mm	1,20

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Notions:

1.      Buttons 27-28 mm - 7 pcs.
2.      Buttons 22 mm - 8 pcs.
3.      Buttons (backer buttons) 14-15 mm - 7 pcs.
4.      Buttons 10-12 mm (for detachable insulated lining) - 23 pcs.
5.      Chain hanging loop 1 pc.
6.      Leather wrapped metal buckle with inner width 50 mm - 1 pc. (for Version 2).
7.      D-ring, metal, with inner width 20 mm - 3 pcs (for Version 2).

Pattern is given with seam allowances.

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - «Advanced».

The photos shows a trench coat sewed at the GRASSER for pattern №1061.

Model is wearing a size 42. Model parameters: Bust-line: 84,5 cm, Waist-line: 64 cm, Hips: 91 cm, Height: 174 cm.

The photo also shows: dress on pattern №911.

For sewing you will need the following equipment:

1.       Multipurpose sewing machine;
2.       3 thread overlock machine;
3.       An iron with or without steam;
4.       Regular presser foot;
5.       Hinged cording foot;
6.       Wooden iron;
7.       Ironing desk or console table;
8.       Hand needle for basting;
9.      Machine needles №80-90 for the main fabric;
10.    Machine needles №70-80 for the lining;
11.    Paper scissors;
12. Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter.

A test square for checking the plotter scale is located on the pattern sheet.

All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.