Balaklava, pattern №801

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Balaklava pattern. Medium size balaklava has stitched placket and collar stand. There are two design versions of center edge and two versions of collar stand length.

- Design 1: narrow neck and roundish top

- Design 2: loose-fitting neck and prominent top.

Design 1 in our photo.

Garment length measurements:

Length of facial balaklava’s opening (along placket’s edge from neckline to folded edge when balaklava is folded in half):  height 152-158= 28,5см, height 158-164=29,1см, height  164-170=29,6см, height 170-176=30,1см, height  176-182=30,7см

Fabric suggestion: we recommend to use soft plastic woolen or half-woolen knit fabrics of average thickness, 350-480 g/m2 density and 0,80-0,85 stretching ratio.

Amount of fabrics:

- Main fabric, wide 140 cm: 0,50м, 

- Silicone tape, wide 6 mm: 0,60м

Pattern is given with seam allowances.

Degree of difficulty - “Beginner”

The photos shows a balaklava sewed at the GRASSER  for pattern №801

The images in the photo also show a dress according topattern No377

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

For sewing you will need the following equipment:

• Multipurpose sewing machine;
  
• Two-legged machine foot, walking or Teflon machine foot (depending on the raincoat fabric type);
• Hand needle for basting;
• Machine needles Microtex № 80;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. Details are located on sheet 60x39 см.

A test square for checking the plotter scale is located on the pattern sheet.