Dress, pattern №648

To set up printing of pattern N648 on A4 sheets, use "Test Square N2"! The test square is located on the first sheet in the pattern file.

Dress pattern.  A fitted dress with the cut-off waistline. A dress is with a length below the knee, lined and sleeveless. The front of the bodice has waist and chest darts. The back of the bodice has waist darts. The center seam of the back bodice has a zipper. The armhole is American. A cut-off belt is stitched along the waistline, and a reps tape is stitched on top of the belt. The upper skirt of the dress is gathered at the waistline. The lower skirt is conical, shorter than the upper skirt by 5 cm.

Finished back length along the center back seam, см.: 38 size: 104,7- 113,8, 40 size: 105,0-114,1, 42 size: 105,3-114,4, 44 size: 105,6-114,7, 46 size: 105,9-115,0, 48 size: 106,1-115,3,  50 size: 106,4-115,6

Fabric suggestion: 

Fabrics for the dress bodice: we recommend using a material with sequins. The basis of sequins can be mesh or knitted fabric.

Fabrics for the upside skirt: the soft tulle. The tulle can be with or without decor.

Fabrics for the downside skirt and the bodice lining: we recommend using for this model malleable, well draped dress or blouse thin fabrics without stretching or with a slight stretch. In terms of composition, it can be silk, viscose, as well as fabrics made of artificial, synthetic or mixed fibers.

Amount of fabrics:

Fabric #1 with sequins (the bodice) for a garment with a width of 140 cm: 0,55- 0,60 м.

Fabric #2 tulle (upside skirt) with a width of 140 cm: 

Height 158-164: 38 size: 6,42 м., 40 size: 6,84 м., 42 size: 7,26 м., 44 size: 7,68 м., 46 size: 8,10 м., 48 size: 8,52 м., 50 size: 8,94 м.

Height 164-170: 38 size: 6,28 м., 40 size: 6,70 м., 42 size: 7,12 м., 44 size: 7,54 м., 46 size: 7,96 м., 48 size: 8,38 м., 50 size: 8,80 м.

Height 170-176: 40 size: 6,61 м., 42 size: 7,03 м., 44 size: 7,45 м., 46 size: 7,87 м., 48 size: 8,29 м., 50 size: 8,71 м.

Height 176-182: 40 size: 6,45 м., 42 size: 6,87 м., 44 size: 7,29 м., 46 size: 7,71 м., 48 size: 8,13 м., 50 size: 8,5 м.

Fabric # 3 dress fabrics (the bodice lining and the downside skirt) with a width of 140 cm: 38,40 size: 2,00- 2,10 м., 42,44 size: 2,10 – 2,20 м., 46,48 size: 2,15- 2,25 м., 50 size: 2,20- 2,30 м.

Pattern is given with seam allowances.

Degree of difficulty - “Intermediate”

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

For sewing you will need the following equipment:

• Multipurpose sewing machine;

• An iron with or without steam;

• Regular presser foot;

• Hinged cording foot;

• Wooden iron;

• Ironing desk or console table;

• Sleeve board;

• Hand needle for basting and sew sequins;

• Machine needles №60 и №70 “super stretch”;

• Paper scissors;

• Scissors for cutting sequins;

• Scissors for cutting other materials.

The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a  large-scale plotter. The patterns size 52 are located on 2 sheets measuring  60*135  см.