Men’s alaska jacket, pattern №552

To set up printing of pattern on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Men's alaska jacket pattern. Men's alaska jacket is of a straight silhouette, medium volume, and hip-length. The front part has slanted upside pockets with welts and downside pockets with welts and pocket flaps. The sleeve is cut as raglan, the sleeve bottom has an attached knitted cuff. The hood is gathered with a drawstring, and also can be fitted by the back strap with a buckle. The central zipper closure is decorated with external and internal windproof plackets. The outer placket fastens with buttonholes loops and buttons. The internal side has a frame pocket with a zipper on the left. The length of ready-made garment to the middle of the back in size 50 at growth 176-182 is 85,5 cm (gorge made more profound to 1,0 cm). Stitch shaping by the chest is 16,0 cm (in total volume - 32,0 cm), stitch shaping by shoulder circumference is 25 cm.

Finished back length along the center back seam, cm:  44 size: 81,9 – 84,9, 46 size: 82,1 – 88,1, 48 size: 82,3 – 88,3,  50 size: 82,5 – 88,5, 52 size: 82,7 – 88,7,  54 size: 82,9 – 88,9, 56 size: 83,1 – 89,1,  58 size: 83,3 - 89,3      

Fabric suggestion: for this model, we recommend using thin MONCLER-type raincoat fabrics, jacket fabrics, raincoat fabrics with a hydrophilic membrane. Use the synthetic insulation of a new generation with a protective layer on both sides, for example, ISOSOFT 34 200 gr/m2. As lining fabrics – use viscose, mixed lining fabrics. For lining the hood, you can use the fabric of the top, natural or artificial fur, fleece, or any dense knitted fabric.

Amount of main fabrics, wide 140 cm: 44 size: 3,4 – 3,5 м; 46,48 size: 3,5 – 3,6 м; 50,52,54 size: 3,6 – 3,7 м; 56,58 size: 3,7 – 3,8 м.  

Lining fabric, wide 140 cm: 44 size: 2,0 – 2,1 м; 46-54 size: 2,1 – 2,2 м; 56,58 size: 2,4 – 2,5 м.  

Insulation material wide 150 cm: 44 size: 3,1 – 3,2 м; 46-48 size: 3,2 – 3,3 м; 50-54 size: 3,3 – 3,4 м; 56,58 size: 3,4 – 3,5 м.  

Ribbing fabric, wide 60-70 сm: 44-58 size: 0,2 м

Faux fur, 140 cm wide: 0,55 м.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Pattern is given with seam allowances.

Level of difficulty - “Advanced level”

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• An iron with or without steam;
• Regular presser foot;
• Hinged cording foot;
• Wooden iron;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles Мicrotex № 80;
• Paper scissors;
• Scissors for textile cutting.
• Press machine to install snap buttons.

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.