Turtleneck sweater in two options: with collar band and hood, pattern №913

Use the Test Square to adjust the print scale! A test square for checking the A4/Letter scale is located on the first sheet of the A4/Letter pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Turtleneck sweater pattern. Turtleneck with an adjacent silhouette, small volume, a thigh-length. The bust dart is transferred to the upper part of the side seam on front details. The bust dart can be ironed or stitched depending on the material you choose and the size of the garment. Turtleneck has set-in long one-piece sleeve with length below the wrist line. The downside seam is shifted towards the front. There is a thumb hole at the bottom of the seam. The neckline of the front has a round shape, assembled by a high collar band (Option 1) or a hood (Option 2). Hood of small volume, with central and front parts.

Eases added to a pattern, cm:  Bust-line: (– 0,5 ) сm; Waist-line: 6,0 cm (for all height in the sizes 38-48), 8,0 cm (for all height in the sizes 50-56); Hips-line: (– 6,0) cm; Shoulders: 1,0 cm.

Finished length along the center back seam, см: 38 size: 53,4-58,6; 40-56 size: 53,4-63,8.

Fabric suggestion: we recommend using various knit fabrics, materials with 0.80 – 0.90 stretching ratio, medium density. You can use various materials in composition and texture, for example, natural (wool, cotton, silk), artificial (viscose, modal), synthetic or blended fabric. Pay attention that the garment has small volume, there are increases with a negative meaning. Use knit fabrics with sufficient stretching ratio.

Amount of fabrics. Option 1. The neckline of the front has a round shape, assembled by a high collar band.

Main fabric, wide 140 cm: 38 size: 0,95-1,00 м; 40,42 size: 1,30-1,45 м; 44 size: 1,15-1,35 м; 46 size: 1,20-1,35 м; 48 size: 1,20-1,40 м; 50 size: 1,25-1,50 м; 52-56 size: 1,35-1,55 м.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Pattern is given with seam allowances.

Degree of difficulty - "Intermediate”

The photos shows a turtleneck sweater wth hood sewed at the GRASSER for pattern №913

Model is wearing a size 44, height 176-182. Model parameters: Bust-line: 88 см, waist-line: 63,5 см, Hips: 90 см, height 179 см

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
  
• 4 thread overlock machine;
• An iron with or without steam;
• Regular presser foot;
• Wooden iron;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles Stretch №80 or Super Stretch №80;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.