Shorts, pattern №84

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Shorts pattern.  Women’s shorts of a regular fit. The version 1 has a turned hem, the version 2 – an attached cuff. The front is designed with deep flat pleats and side pockets with diagonal openings. The back pieces have two pairs of waist darts. The attached waistband is rectangular, with 5 belt loops 4 cm wide. The closure has a zip installed into the front centre seam and two invisible snap fasteners on the waistband. The waistline is regular.

Eases added to a pattern, cm:  Waist-line: 2.8  cm; Hips-line: 10.6 cm.

Finished length along the side seam, см: 38 size: 37,2-39,8, 40 size: 37,5-42,7, 42 size: 37,8-43, 44 size: 38,3-43,4, 46 size: 38,6-43,8, 48 size: 39,0-44,1, 50 size: 39,4-44,5, 52 size: 39,8-44,9, 54 size: 40,3-45,4,  56 size: 40,8-45,8.

Fabric suggestion: 
Main fabric. For this model we recommend using dress and blouse fabrics, thin suit fabrics, made of natural or mixed fibers with the addition of elastane, pliable and easily draped. You can also use various denim fabrics.

Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 18 g/m2 density 140 cm, width woven interfacing; 34 g/m2 density 140 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.

Amount of Fabrics (in metres):

Main fabric, wide 140 cm (option 1): sizes 38-40: 0.85-0.90, size 42-44: 0.90-0.95, sizes 46-48: 0.95-1.00, size 50: 1.00-1.05, size 52: 1.00-1.15, size 54: 1.05-1.15, size 56: 1.10-1.20.

Main fabric, wide 140 cm (option 2):  sizes 38-44: 1.00-1.05, sizes 46-48: 1.05-1.10, sizes 50-54: 1.10-1.15, size 56: 1.10-1.20.

Interfacing (density 18 g/m2; width 140 cm): sizes 38-56: 0.15.

Interfacing (density 34 g/m2; width 140 cm): sizes 38-56: 0.25.

Fusible on grain tape: size 38: 2.00, size 40: 2.10, size 42: 2.15, size 44: 2.25, size 46: 2.35, size 48: 2.45, size 50: 2.55, size 52: 2.60, size 54: 2.70, size 56: 2.80.

Garment accessories:

1. 18 cm plastic spiral zipper №4– 1 pcs.

2. Trouser hook – 1 pcs.

ATTENTION! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once. Fabric may shrink so we recommend to make a test to find out fabric’s shrinkage ratio, result must be added to the fabric consumption. If you plan to cut out details with extra seam allowances then add 30 cm extra.

Pattern is given with seam allowances.

Degree of difficulty - "Intermediate”

The photos shows a shorts sewed at the GRASSER  for pattern №84

Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 83см, waist-line: 61см, Hips: 88см, height 173 см

The images also shows: blouse on pattern №496 , blouse on pattern №419 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• 3 thread overlock machine;
• An iron with or without steam;
• Regular presser foot;
• Hinged cording foot;
• Wooden iron;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles №80;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.