Bikini bra, pattern №478
Sizes:
-
size 38
-
size 40
-
size 42
-
size 44
-
size 46
-
size 48
-
size 50
-
-
Size:
- 38
- 40
- 42
- 44
- 46
- 48
- 50
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
Bikini bra pattern. Bikini bodice with triangular cups and lining. The bottom of the bodice has a binding strip of waistband. The volume under the breast is adjusted with binding strips.
Fabric suggestion: we recommend you to use elastic fabrics, fabrics that are suitable for swimming, for example, lycra, microfiber, biflex for this model. Use a thin elastic material that stretches in the longitudinal and transverse directions as lining. Foam rubber or neoprene.
Amount of elastic fabric, wide 140 cm: 38-42 size: 0,75 м, 44-46 size: 0,8 м, 48-50 size: 0,85 м.
Foam rubber (3 mm) or neoprene (5 mm): 38-42 size: 0,35м, 44-46 size: 0,30 м, 48-50 size: 0,40 м.
Pattern is given with seam allowances.
Level of difficulty - “Intermediate”
The photos shows a bikini bra sewed at the GRASSER for pattern №478.
The photo also shows: panties on pattern №477.
We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS!
Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.
For sewing you will need the following equipment:
- Multipurpose sewing machine;
- Stitching lines used: straight, zigzag, multi-puncture zigzag;
- 4 thread overlock machine;
- Wooden iron;
- Ironing desk or console table;
- Hand needle for basting;
- Machine needles Stretch №75 and Microtex №70, 80. Needles depend on the use of rubber bands. Machine needles Microtex for the latex ribbon;
- Paper scissors;
- Scissors for textile cutting.
The pattern in your order will be in two print options:
1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!
A test square for checking the A4 print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter.
A test square for checking the plotter scale is located on the pattern sheet.
All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.
