Dress, Pattern №553

To set up printing of pattern on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Dress pattern. Semiadherent dress, free to the bottom, knee-length. The front is with chest darts. Back with a deep swing cut, reinforced by placket with a bow on the top. The back is cutting at the waist, the lower part of the back with the waist darts. By the shoulders of the back are gathered pleats. In the left side seam there is a clasp on zipper tape. Set-in-sleeve. The length of ready-made dress from the waist to the bottom by the middle of back in size 44 at growth 164-170 is 49,0 cm. Stitch shaping by the chest is 5,5 cm (in total volume - 11,0 cm), stitch shaping by hips is 3,0 cm (in total volume - 12,0 cm), stitch shaping by shoulder circumference is 5,5 cm.

Fabric suggestion: Dress or thin suit fabrics without stretching or with a small stretching.

Fabric consumption: Fabric width is 140-150cm, the length of the top fabric is 2,10 m – 2,40 m. Fabric consumption is given with margin in case of sewing or cutting mistake. Pattern pieces should be in expanded form for economy of fabric.

Pattern is given with seam allowances.

Level of difficulty - “Advanced Beginner”

Sewing instruction is attached to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order wiil be in two print version:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns are located on a sheet measuring 60*227 cm.

Presented is a photo of dress from Valentino collection for visual demonstration of pattern №553.

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.