Jacket, pattern №1017

Sizes:

size 38, height 152-158
size 38, height 158-164
size 38, height 164-170
size 40, height 152-158
size 40, height 158-164
size 40, height 164-170
size 40, height 170-176
size 40, height 176-182
size 42, height 152-158
size 42, height 158-164
size 42, height 164-170
size 42, height 170-176
size 42, height 176-182
size 44, height 152-158
size 44, height 158-164
size 44, height 164-170
size 44, height 170-176
size 44, height 176-182
size 46, height 152-158
size 46, height 158-164
size 46, height 164-170
size 46, height 170-176
size 46, height 176-182
size 48, height 152-158
size 48, height 158-164
size 48, height 164-170
size 48, height 170-176
size 48, height 176-182
size 50, height 152-158
size 50, height 158-164
size 50, height 164-170
size 50, height 170-176
size 50, height 176-182
size 52, height 152-158
size 52, height 158-164
size 52, height 164-170
size 52, height 170-176
size 52, height 176-182
size 54, height 152-158
size 54, height 158-164
size 54, height 164-170
size 54, height 170-176
size 54, height 176-182
size 56, height 152-158
size 56, height 158-164
size 56, height 164-170
size 56, height 170-176
size 56, height 176-182
-

Size:

Height:

152-158
158-164
164-170
170-176
176-182

$10

After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".

Info

Comments

Questions

Jacket pattern. Mid-length lined straight cropped jacket. The chest dart is converted into a waist dart. The back has a centre seam and princess seams from armhole to hem. The set-in sleeves have a double seam. There is a welp pocket with flap and facing on the front, and a chest patch pocket on the left side. The central fastening consists of three buttonholes and three buttons. The notched collar has a sewn-in collar stand.

Eases added to a pattern, cm: Bust-line – 14,5 cm; Waist-line – 25 cm; Shoulders – 8,5 cm.

Garment Length Measurements, cm:

Size	38	40	42	44	46	48	50	52	54	56
Finished back length along the center back seam	36,1-38,3	36,2-40,7	36,3-40,8	36,4-40,9	36,5-41,0	36,6-41,1	36,7-41,2	36,8-41,3	36,9-41,4	37,0-41,5
Finished sleeve length	56,4-60,8	56,6-64,2	56,8-64,4	57,0-64,6	57,2-64,8	57,4-65,0	57,6-65,2	57,8-65,4	58,0-65,6	58,2-65,8

Fabric suggestion:

Main fabric. We recommend using suiting fabrics that are easily steam-pressed, as well as fabrics made of natural, synthetic or mixed fibres. For example, this can be suiting fabric of various density, denim, thin coating fabrics, tweed and other fabrics.

Lining material. To line the garment, use fabrics, the plasticity and density of which suit the shell fabric, made of natural, synthetic or mixed fibres.

Interfacing materials. For better quality of sewing, we recommend to use the interfacing material and fusible facing straightener. For example, you may use 33 g/m2 and 55 d/m2 density 150 cm, width woven interfacing. For better sewing quality, we recommend strengthening some details with a feasible facing straightener of 64 g/m2 and with the width of 90 cm. The density of the interfacing material depends on the main fabric density.

Amount of Fabrics (in metres):

Size	38	40	42	44	46	48	50	52	54	56
Main fabric, wide 140 cm	1,10- 1,15	1,15- 1,20	1,15- 1,25	1,20- 1,30	1,25- 1,30	1,25- 1,35	1,30- 1,35	1,30- 1,40	1,35- 1,45	1,35- 1,45
Lining fabric, wide 140 cm	0,90- 0,95	0,90- 1,00	0,95- 1,00	0,95- 1,05	0,95- 1,05	1,00- 1,10	1,00- 1,10	1,00- 1,15	1,05- 1,15	1,05- 1,15
Interfacing (density 33 g/m2; width 150 cm)	0,35				0,4
Interfacing (density 55 g/m2; width 150 cm)	0,60-0,70		0,65-0,75					0,70-0,80
Fusible facing straightener (density 64 gr/m2; width 90 cm)	0,25
Fusible on grain tape	2,80
Fusible reinforced bias tape	2,00	2,00	2,05	2,05	2,05	2,10	2,10	2,15	2,20	2,20

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Garment accessories:

1. Buttons with the diameter of 20-25 mm – 3 pcs.

2. One pair of the attachable sleeve cap pad with the width of 10 mm.

3. Sleeve head (size 290*45*20 mm) – 1 pair.

Pattern is given with seam allowances.

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - "Advanced”.

The photos shows a jacket sewed at the GRASSER for pattern №1017.

Model is wearing a size 42. Model parameters: Bust-line: 84,5 cm, Waist-line: 64 cm, Hips: 91 cm, Height: 174 cm.

The photo also shows: skirt on pattern №1018, sundress on pattern №1019

For sewing you will need the following equipment:

1. Multipurpose sewing machine with the buttonhole function;
2. An iron with or without steam;
3. Regular presser foot;
4. Hinged cording foot;
5. Wooden iron;
6. Ironing desk or console table;
7. Hand needle for basting;
8. Machine needles №90 for the main fabric;
9. Machine needles №70 for the lining;
10. Paper scissors;
11. Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter.

A test square for checking the plotter scale is located on the pattern sheet.

All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.