Jacket, pattern №1053

Sizes:

size 42, height 170-176
size 42, height 176-182
size 44, height 170-176
size 44, height 176-182
size 44, height 182-188
size 44, height 188-194
size 46, height 170-176
size 46, height 176-182
size 46, height 182-188
size 46, height 188-194
size 48, height 170-176
size 48, height 176-182
size 48, height 182-188
size 48, height 188-194
size 50, height 170-176
size 50, height 176-182
size 50, height 182-188
size 50, height 188-194
size 52, height 170-176
size 52, height 176-182
size 52, height 182-188
size 52, height 188-194
size 54, height 170-176
size 54, height 176-182
size 54, height 182-188
size 54, height 188-194
size 56, height 170-176
size 56, height 176-182
size 56, height 182-188
size 56, height 188-194
size 58, height 170-176
size 58, height 176-182
size 58, height 182-188
size 58, height 188-194
size 60, height 170-176
size 60, height 176-182
size 60, height 182-188
size 60, height 188-194
size 62, height 170-176
size 62, height 176-182
size 62, height 182-188
size 62, height 188-194
size 42, height 182-188
size 42, height 188-194
-

Size:

Height:

170-176
176-182
182-188
188-194

$11

After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".

Info

Comments

Questions

Jacket pattern. Loose-fit, straight, hip-length jacket. Front zipper opening with an underlap. The underlap is 3 cm wide sewn with the decorative fur trim. The front features an attached bottom piece and welted pockets. The welt has topstitched ends and an inner snap fastener closure. The back features a yoke and an attached bottom piece. The hem is finished with the cut-on fur trim 3.5 cm wide. A strap with two snap fasteners is designed to adjust the volume of the hemline. One-seam, set-in, wrist-length sleeve with a horizontal section. The sleeve hem is finished with a cut-on fur cuff 3.5 cm wide. The neckline is round, finished with a roll collar. The collar features a throat latch with a rectangular metal loop and one snap fastener. The ends and the base of the collar are decorated with fur trim 3 cm wide.

Eases added to a pattern, cm:

Bust-line– 32,0 cm.

Waist-line – 37,0 cm (for all height in the sizes 42-48);

– 39,0 cm (for all height in the sizes 50-54);

– 41,5 cm (for all height in the sizes 56-62).

Shoulders – 18,5 cm .

Hips-line, cm:

Height/Size	42	44	46	48	50	52	54	56	58	60	62
170-176	16,6	17,6	18,6	19,6	22,6	23,6	24,6	28,7	29,7	30,7	31,7
176-182	15,8	16,8	17,8	18,8	21,8	22,8	23,8	28,0	29,0	30,0	31,0
182-188	15,0	16,0	17,0	18,0	21,0	22,0	23,0	27,2	28,2	29,2	30,2
188-194	14,2	15,2	16,2	17,2	20,2	21,2	22,2	26,4	27,4	28,4	29,4

Garment Length Measurements, cm:

Size	42	44	46	48	50	52	54	56	58	60	62
Finished back length along the center back	71,5-77,5	71,6-77,6	71,7-77,7	71,8-77,8	72,0-78,0	72,2-78,2	72,4-78,4	72,5-78,5	72,9-78,9	73,1-79,1	73,3-79,3
Finished sleeve length	64,8-70,5	60,1-70,8	65,4-71,1	65,7-71,4	66,0-71,7	66,3-72,0	66,6-72,3	66,9-72,6	67,2-72,9	67,5-73,2	67,8-73,5

Fabric suggestion:

Main fabric. We recommend natural sheep fur or sherpa fabric with leatherette or suede back for this garment.

Finishing material. Use thin or mid-weight faux leather or suede as a decorative material for welt lining pieces, straps, facing for leading edge and neckline.

Lining material. For the lining use the material with density and plasticity suitable for the shell fabric, made out of natural, synthetic or blended fibre.

Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 39 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.

Amount of Fabrics (in metres):

Size	42	44	46	48	50	52	54	56	58	60	62
Main fabric, wide 140 cm	1,65-1,70	1,65-1,75	1,70-1,80	1,75-1,85	1,80-1,90	1,85-1,95	1,90-2,00	1,95-2,05	2,00-2,10	2,00-2,20	2,10-2,20
Finishing fabric, wide 140 cm	0,75-0,80	0,75-0,80	0,75-0,80	0,75-0,80	0,75-0,80	0,80-0,85	0,80-0,85	0,80-0,85	0,80-0,85	0,80-0,85	0,80-0,85
Lining fabric, wide 140 cm	0,35
Interfacing (density 39 g/m2; width 150 cm)	0,40
Fusible on grain tape	0,60

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Garment accessories:

1. Open-end metal zipper #5 65-75 cm long - 1 pc

2. Snap fasteners, diameter 12.5-15 mm - 7 pcs

3. Rectangular loop or D-ring, metal, 40 mm - 2 pcs

4. Ready-to-use leather hanging loop - 1 pc.

Attention! Please, specify the zipper length in accordance with your size and height.

Pattern is given with seam allowances.

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - «Advanced».

The photos shows a jacket sewed at the GRASSER for pattern №1053.

Model is wearing a size 52, height 188-194. Model parameters: Bust-line: 103 cm, Waist-line: 82 cm, Hips: 102 cm, Height: 188 cm.

The photo also shows: t-shirt on pattern №955, sweater on pattern №813, trousers on pattern №501, trousers on pattern №1054

For sewing you will need the following equipment:

1.      Multipurpose sewing machine;
2.      An iron with or without steam;
3.      Regular presser foot;
4.      Hinged cording foot;
5.      Wooden iron;
6.      Ironing desk or console table;
7.      Hand needle for basting;
8.      Machine needles №100-120 - for leather;
9.      Paper scissors;
10. Scissors for textile cutting;
11. Snaps pressing machine to install accessories press studs, depending on the diameter.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter.

A test square for checking the plotter scale is located on the pattern sheet.

All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.