The photo also shows: trousers on pattern №1214, sleeveless shirt on pattern №991, dress on pattern №674
Jacket, pattern №1332
Slim-fit jacket with an extended shoulder line, fully lined, and featuring a button-front closure. Set-in sleeves with high attached cuffs fastened with four buttons. Decorative epaulets with button details on the shoulders. Stand collar with softly rounded ends.
Difficulty: 4/5
Instructions with photo
Plotter 900 + А4/Letter
Sizes:
-
size 38, height 152-158
-
size 38, height 158-164
-
size 38, height 164-170
-
size 40, height 152-158
-
size 40, height 158-164
-
size 40, height 164-170
-
size 40, height 170-176
-
size 40, height 176-182
-
size 42, height 152-158
-
size 42, height 158-164
-
size 42, height 164-170
-
size 42, height 170-176
-
size 42, height 176-182
-
size 44, height 152-158
-
size 44, height 158-164
-
size 44, height 164-170
-
size 44, height 170-176
-
size 44, height 176-182
-
size 46, height 152-158
-
size 46, height 158-164
-
size 46, height 164-170
-
size 46, height 170-176
-
size 46, height 176-182
-
size 48, height 152-158
-
size 48, height 158-164
-
size 48, height 164-170
-
size 48, height 170-176
-
size 48, height 176-182
-
size 50, height 152-158
-
size 50, height 158-164
-
size 50, height 164-170
-
size 50, height 170-176
-
size 50, height 176-182
-
size 52, height 152-158
-
size 52, height 158-164
-
size 52, height 164-170
-
size 52, height 170-176
-
size 52, height 176-182
-
size 54, height 152-158
-
size 54, height 158-164
-
size 54, height 164-170
-
size 54, height 170-176
-
size 54, height 176-182
-
size 56, height 152-158
-
size 56, height 158-164
-
size 56, height 164-170
-
size 56, height 170-176
-
size 56, height 176-182
-
-
Size:
- 38
- 40
- 42
- 44
- 46
- 48
- 50
- 52
- 54
- 56
Height:
- 152-158
- 158-164
- 164-170
- 170-176
- 176-182
$7.70
$11
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
Close-fitting, straight silhouette jacket, below waist length, lined. Center front button closure has 8 buttonholes and 8 buttons. The front has armhole princess seams and a bust dart emerging from the princess seam. The back has shoulder darts and armhole princess seams. The sleeve is set-in, two‑piece, full‑length. The sleeve hem is finished with a long attached cuff; the cuff closure has 4 buttonholes and 4 buttons. The shoulder line is extended. Shaped shoulder boards with a decorative button are placed on the shoulder seams. The round neckline is finished with a band collar with rounded ends.
Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 85 cm, Waist-line: 63 cm, Hips: 93 cm, Height: 172 cm.
-
Bust-line: 11,0 сm
Shoulders: 10,0 сm
Waist-line, сm:
Size 38 40 42 44 46 48 50 52 54 56 24,4-26,6 24,2-28,6 24,0-28,4 23,8-28,2 23,6-28,0 23,4-27,8 23,2-27,6 23,0-27,4 22,2-26,6 2,4-25,8
-
Size 38 40 42 44 46 48 50 52 54 56 Finished back length along the center back 40,5-43,7 40,6-47,0 40,7-47,1 40,9-47,3 41,0-47,4 41,1-47,5 41,2-47,6 41,4-47,8 41,5-47,9 41,6-48,0 Finished sleeve length 53,6-57,4 53,8-61,4 54,0-61,6 54,2-61,8 54,4-62,0 54,6-62,2 54,8-62,4 55,0-62,6 55,2-62,8 55,3-62,9
-
Main fabric. We recommend using suiting fabrics of medium thickness and density, lightweight coat-and-suit fabrics with no stretch. As for fiber content, these can be materials made from natural, synthetic, or blended fibers.
Lining fabrics. We recommend using suiting fabrics of medium thickness and density, lightweight coat-and-suit fabrics with no stretch. As for fiber content, these can be materials made from natural, synthetic, or blended fibers.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material and fusible facing straightener. For example, you may use 55 g/m2 and 39 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density. For better tailoring we recommend using a side booster with a non-adhesive density of 90 g/m2, a width of 90 cm.
-
The amount of fabric in meters.
Size 38 40 42 44 46 48 50 52 54 56 Main fabric, wide 140 cm 1,15 1,15-1,20 1,20-1,30 1,25-1,30 1,30-1,35 1,30-1,40 1,35-1,45 1,35-1,45 1,40-1,50 1,45-1,50 Lining fabric, wide 140 cm 0,85-0,90 0,90-1,00 0,90-1,00 0,90-1,00 0,90-1,00 0,90-1,00 0,95-1,05 0,95-1,05 0,95-1,05 0,95-1,10 Interfacing (density 55 g/m2; width 150 cm) 0,90-0,95 0,90-1,05 0,95-1,05 0,95-1,10 1,00-1,10 1,05-1,10 1,05-1,15 1,10-1,15 1,15-1,20 1,15-1,20 Interfacing (density 39 g/m2; width 150 cm) 0,55-0,65 0,60-0,65 0,60-0,65 0,60-0,65 0,60-0,65 0,60-0,70 0,60-0,70 0,60-0,70 0,65-0,70 0,65-0,70 Non-fusible facing straightener of 90 g/m2 and with the width of 90 cm 0,30 Bias fusible tape with reinforcement stitches 1,85-1,90 1,85-1,95 1,90-1,95 1,95-2,00 2,00-2,05 2,05-2,10 2,10-2,15 2,10-2,20 2,15-2,20 2,20-2,25 Fusible on grain tape
3,40-3,50 3,45-3,65 3,55-3,75 3,60-3,80 3,65-3,85 3,75-3,95 3,80-4,00 3,90-4,05 3,95-4,15 4,00-4,20
Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Accessories:
1. Shank metal button with the diameter of 14-16 mm - 18 pcs.
2. Attachable shoulder pads with the thickness of 15 mm - 1 pair.
3. Sleeve cap pad - 1 pair.
-
01. Multipurpose sewing machine;
02. An iron with or without steam;
03. Regular presser foot;
04. Wooden iron;
05. Ironing desk or console table;
06. Hand needle for basting;
07. Machine needles №75-80 for the main fabric;
08. Machine needles №70 for the lining;
09. Paper scissors;
10. Scissors for textile cutting.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.
