Jacket, Pattern №343

To set up printing of pattern on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Jacket pattern. Mid-thigh direct Jacket, lined, with English collar and displaced shoulder seam to the front. There are pocket welts with the flap and chest pocket welt with sewed on edges on the front; and there is a vent in the average back seam. Volumetric, double-seam set-in sleeve, narrowed to the bottom. Clasp is in the center on the one bounded loop and button. The length of ready-made garment on average back seam in 44 size at growth 164-170 cm is 74 cm (gorge is made more profound to 27 mm).

Fabric suggestion: Soft, flexible fabricы with a small stretch, well respond wet-heat processing; soft thick knitwear; lining fabrics. Not dense suit fabrics, soft knitted fabric with a small stretch; lining fabrics. 

Fabric consumption:  Fabric width is 140-150cm, the length is 2 m – 2,4 m for the top fabric and 1,3 m – 1,4 m for the lining. Fabric consumption is given in case of sewing or cutting mistake. Pattern pieces should be placed on the fold of a piece of fabric. Pattern pieces of lining should be in expanded form. During cutting pay attention to the inscriptions "face" on the details.  

Pattern is given with seam allowances.

Degree of difficulty - “Advanced Beginner”

Sewing instruction is atteched to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns of top are located on a sheet measuring 60*251 cm. The patterns of lining are located on a sheet measuring 60*235 cm.

The model was developed by the designer of the brand  KSUSHA RAIKOVA 

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.