Jacket, pattern №772

It’s a slim fit slightly lower than hips jacket with lining. Front has princess seams that start from the armholes and finish at the undercut section (princess seam is replaced from the bust point), bust darts that are located at princess seams. Jacket is double-breasted with 2 sewn buttonholes and 2 buttons; 2 decorative buttons and 1 sewn buttonhole on the left leading edge that match to a topside decorative one. Leading edges are merging into the lapels. Side pockets are located in the undercut section, pocket opening has little bit volume. Back has center seam and princess seams that start from the armhole and finish at garment’s hemline. Jacket has set-in long two-piece sleeves. Jacket has turndown collar with cut-off neckband, its neckline opens shoulders (neckline is enlarged, shoulder seams are 3 cm). 

General increases, laid in the pattern: Bust-line: 6,0 см, Waist: 6,5 см, Hips-line: 9,5 см + model’s widening, Shoulders: 7,0 см

Finished back length along the center back seam, см.: 38 size: 53,0-60,7, 40 size: 53,2-60,9, 42 size: 53,4-61,1, 44 size: 53,6-61,3, 46 size: 53,8-61,5, 48 size: 54,0-61,7,  50 size: 54,2-61,9, 52 size: 54,4-62,1

Fabric suggestion: we recommend you to use suiting cloth of average thickness and density without stretching ratio. It can be wool, synthetic, semisynthetic or blended fabric. Use viscose or silk as lining.

Main fabric, wide 140 cm: 38-44 size: 2,05-2,20м, 46-48 size: 2,10-2,25м , 50-52 size: 2,15-2,30м  

Lining fabric, wide 140 cm:   38-46 size: 1,30-1,40м, 48-52 sizeр: 1,35-1,45м

Pattern is given with seam allowances.

Degree of difficulty - “Advanced”

The photos shows a jacket sewed at the GRASSER  for pattern №772

Model is wearing a trench size 42, height 164-170. Model parameters: Bust-line: 84, waist-line: 57, Hips: 86, height 170

In the gallery under the main photo and in the video below you can see a 3D visualization - this is how the dress will look in sizes 38 and 52.

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

For sewing you will need the following equipment:

• Multipurpose sewing machine;
• 3 thread overlock machine;
• An iron with or without steam;
• Regular presser foot;
• Hinged cording foot;
• Wooden iron;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles №80;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. Details of top for size 52 are located on 2 sheets 60*211см см. Details of lining for size 52 are located on sheet 60*129см

A test square for checking the plotter scale is located on the pattern sheet.