Jumpsuit, pattern №494

Jumpsuit pattern. An open back jumpsuit is cut-off at the waistline, and partially lined. The upper part is of a small volume, trousers with an extension to the bottom. The length of the jumpsuit trousers is presented in two versions: option 1 – the length is to mid-calf, option 2 – elongated, for the heel shoes. The upper part of the front is with reliefs, V-neckline and a wrap. On the back, the ties are threaded into loops. The front halves are decorated with deep one-sided pleats and a counter pleat with an effect of a wrap in the center. The zipper closure is in the center seam of the back part of the trousers. There is one pair of waist darts on the back parts of trousers.

Eases added to a pattern, cm: Bust-line: 0, Waist-line: 7,0, Hips-line: 5,0 + model’s widening

Finished length along the side seam (version 1), сm: 38 size: 65,7-72,3, 40 size: 65,9-79,1, 42 size: 66,1-79,3, 44 size: 66,3-79,4, 46 size: 66,5-79,6, 48 size: 66,7-79,8, 50 size: 66,9-80,0, 52 size: 67,1-80,2, 54 size: 67,3-80,4, 56 size: 67,5-80,6.  .

Finished length along the side seam (version 2), сm: 38 size: 95,3-103,9, 40 size: 95,7-112,9, 42 size: 96,1-113,3, 44 size: 96,5-113,7, 46 size: 96,9-114,1, 48 size: 97,3-114,5, 50 size: 97,7-114,9, 52 size: 98,1-115,3, 54 size: 98,5-115,7, 56 size: 98,9-116,1.

Finished garment hem width (version 1), сm: 38 size: 87,3-89,8, 40 size: 88,8-92,2, 42 size: 90,2-93,8, 44 size: 91,8-95,3, 46 size: 93,3-96,8, 48 size: 94,8-98,5, 50 size: 96,3-99,8, 52 size: 97,9-101,4, 54 size: 99,4-102,8, 56 size: 100,8-104,4.

Finished garment hem width (version 2), сm: 38 size: 92,4-93,3, 40 size: 93,9-95,6, 42 size: 95,5-97,2, 44 size: 97,0-98,7, 46 size: 98,6-100,3, 48 size: 100,1-101,8, 50 size: 101,7-103,3, 52 size: 103,2-104,8, 54 size: 104,8-106,4, 56 size: 106,2-107,9.

Fabric suggestion: For this model, we recommend using light and medium-density fabrics of the dress-blouse group, without stretching or with a slight stretch. By composition, it can be cotton, viscose, linen, silk, as well as fabrics made of artificial, synthetic or mixed fibers. Lining fabrics – as a lining fabric, you can use the top material or other materials suitable for pliable properties and density to the top material, made of natural, synthetic or mixed fibers

Amount of main fabric, wide 140 cm, all details (version 1): 38 size: 1,60-1,70 m, 40 size: 1,65-1,85 m, 42 size: 1,70-1,95 m, 44 size: 1,75-1,95 m, 46 size: 1,75-2,00 m, 48 size: 1,80-2,05 m, 50 size: 1,85-2,10 m, 52 size: 1,90-2,20 m, 54 size: 1,90-2,25 m, 56 size 2,00-2,25 m. 

Amount of main fabric, wide 140 cm, all details (version 2): 38 size: 2,15-2,35 m, 40 size: 2,15-2,50 m, 42 size: 2,20-2,50 m, 44 size:2,20-2,55 m, 46 size: 2,25-2,60 m, 48 size: 2,30-2,70 m, 50 size: 2,35-2,70 m, 52 size: 2,40-2,80 m, 54 size: 2,50-2,85 m, 56 size 2,55-2,95 m. 

Amount of interfacing (density 18 g/m2, width 150 cm: 38-56 size: 0,20 m. 

Amount of bias fusible tape with reinforcement stitches: 38-44 size: 1,90 m, 46-50 size: 1,95 m, 52-54 size: 2,00 m, 56 size: 2,05 m. 

Amount of fusible on grain tape: 38 size: 0,60 m, 40-48 size: 0,65 m, 50-56 size: 0,70 m. 

Garment accessories: 1. Invinsible zipper tape 15 cm – 1 pcs.

Degree of difficulty - "Intermediate” 

The photos shows a jumpsuit sewed at the GRASSER  for pattern №494

Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 85 см, waist-line: 61 см, Hips: 91 см, height 174 см

The photo also shows: jacket on pattern №800

For sewing you will need the following equipment: 

·         Multipurpose sewing machine;

·         3 thread overlock machine;

·         An iron with or without steam;

·         Regular presser foot;

·         Hinged cording foot;

·         Invinsible zipper foot;

·         Wooden iron;

·         Ironing desk or console table;

·         Hand needle for basting;

·         Machine needles №70-80;

·         Paper scissors;

·         Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.