Knit jumper, pattern №810

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Jumper pattern. Regular fit knit jumper, length above the hipline. The bust dart has been transferred into the armhole and princess seams. The back is seamless. There is no seam on the shoulder. The front and back have a boat neckline. The shoulder area of front overlaps to the back. The sleeve is set-in has an upper seam and it is made up of four pieces: two front ones and two back ones. Lower front and back pieces shape a pleat sewn in the upper part of the sleeve cap. The upper seam creates some fullness at the elbow area and tightness at the sleeve hemline. 

Garment’s specific characteristics: fabrics with two different textures are used in this garment. Sleeve lower pieces and neckline bindings are made of matching embellishment fabric. Our sample is completed of a double-faced fabric. The pieces were cut on different sides of the fabric.

If you like you can cut all the pieces out of the fabric with one texture only.   

Eases added to a pattern: Bust-line: 38-42 size: 10,5 см, 44 size: 11,3 см, 46 size: 12,1 см, 48 size: 12,9 см,  50 size: 13,7 см, 52 size: 14,5см; Waist-line: 32,0 см Shoulders: 7,0 см + model’s widening

Garment length along the centre back from the neckline binding top till the finished hem: 38 size: 54,2 – 58,1, 40 size: 54,4 – 62,3, 42 size: 54,6 – 62,5, 44 size: 54,8 – 62,7, 46 size: 55,0 – 62,9, 48 size: 55,2 – 63,1,  50 size: 55,4 – 63,3, 52 size: 55,6 – 63,5

Fabric suggestion: we recommend soft mid-weight knit fabric for this garment. You may use natural, blended or synthetic knit fabric. We used for our jumper a knit fabric with stretch factor 0.9-0.95 %, composition: 95% wool, 5% acetate.

Amount of fabric, wide 140 cm: 38 size: 1,0 – 1,1м, 40-46 size: 1,1 – 1,3м, 48 size: 1,15 - 1,35м, 50,52 size: 1,2 - 1,4м

Amount of fabric, wide 140 cm (for downside part of sleeve and neckline binding):  38 size: 0,45 – 0,5м, 40 size: 0,45 – 0,5 м., 42-46 size: 0,5 – 0,55м, 48-52 size: 0,5 – 0,55м.

Amount of fabric, wide 110 cm (total amount of fabrics): 38 size: 1,6 – 1,7м, 40,42 size: 1,6 – 1,8м, 44 size: 1,7 – 1,9м., 46,48 size: 1,8 – 2,0м, 50,52 size: 2,0 - 2,2м

Pattern is given with seam allowances.

Degree of difficulty - "Intermediate”

The photos shows a jumper sewed at the GRASSER  for pattern №810

Model is wearing size 42, height 164-170.  Model parameters: Bust-line: 82, waist-line: 59, Hips: 91, height 170

The image in the photo also includes: a shorts according to pattern №84

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• 4 thread overlock machine;
• An iron with or without steam;
• Regular presser foot;
• A coverstitch machine;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles Stretch №80;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. Details of size 52 are located on sheet 60*195 см.