Men's hoodie, pattern №817

To adjust the print scale, use the Test square! The test square for checking the A4 scale is located on the first sheet in the A4 pattern file. The test square for checking the print scale on the plotter is located on the sheet with the details of the pattern in the file for the plotter.

Men's hoodie pattern:  A straight silhouette hoodie with a large kangaroo pocket in the center of the front. The back part is without center seam. The shoulder line is lowered, the sleeve has the attached cuff. The hood has a central seam and is finished with a one-piece facing with decorative drawstring threaded through the grommets. The bottom is finished with a waistband.  If you desire, the waistband and cuffs can be finished with ready-made decorative cuffs and waistbands.

Finished back length along the center back, см: 44 size: 61,2 – 67,2 , 46 size: 61,4 – 67,4, 48 size: 61,6 – 67,6, 50 size: 61,8 – 67,8, 52 size: 62,0 – 68,0, 54 size: 62,2 – 68,2,  56 size: 62,4 – 68,4, 58 size: 62,6 – 68,6, 60 size: 62,8 – 68,8, 62 size: 63,0 – 69,0.

Fabric suggestion: we recommend using a 2-thread or 3-thread a fleece knitted fabric, a 2-thread or 3-thread-loop french terry jersey fabric with a looped back for this model. Rib-knit fabric of medium density for the details of the cuffs and waistband and the cotton jersey for the lining details. In composition, it can be made of cotton or cotton in combination with other fibers.

Main garment fabric 140cm wide: 44 size: 1,85 – 1,9м, 46-50 size: 2,0 – 2,1м,  52,54 size: 2,2 – 2,3м, 56 size: 2,3 – 2,4м,   58-62 size: 2,35 – 2,45 м.

Main garment fabric 180cm wide: 44 size: 1,35 – 1,4м, 46 size: 1,4 – 1,5м, 48 size:1,45 – 1,55м, 50 size: 1,5 – 1,6м,  52,54 size: 1,6 – 1,7м, 56,58 size: 1,65 – 1,75м,   60-62 size: 1,75 – 1,85 м.

Rib-knit fabric, 140cm wide: 44-62 size: 0,25м

Pattern is given with seam allowances.

Degree of difficulty - “Intermediate”

The photo shows hoodie sewed at the GRASSER bureau for pattern №817

The sweatshirt is sewn on a pattern of 52 sizes, height 164-170. Model parameters: Bust-line: 83cm, waist-line: 62cm, Hips: 87cm, height 167

The images also show: trousers for pattern №501

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

For sewing you will need the following equipment:

• Multipurpose sewing machine;

• 4 thread overlock machine;

• An iron with or without steam;

• Regular presser foot;

• A coverstitch machine;

• Wooden iron;

• Ironing desk or console table;

• Hand needle for basting;

• Machine needles Stretch №80-90;

• Paper scissors;

• Scissors for textile cutting;

• Eyelet press for installing eyelets and press studs, depending on the diameter.

The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a  large-scale plotter. The patterns size 62 are located on sheet measuring 60x276 см. 

The test square for checking the print scale on the plotter is located on the sheet with the details of the pattern.