Men's trousers, pattern №1113
Wide straight men's trousers with a fitted waistband and ironed creases, fastened at the front with a zipper and button. Front halves with deep folds and side pockets.
Medium difficulty
Instructions with photo
Plotter 900 + А4/Letter
Sizes:
-
size 42, height 170-176
-
size 42, height 176-182
-
size 44, height 170-176
-
size 44, height 176-182
-
size 44, height 182-188
-
size 44, height 188-194
-
size 46, height 170-176
-
size 46, height 176-182
-
size 46, height 182-188
-
size 46, height 188-194
-
size 48, height 170-176
-
size 48, height 176-182
-
size 48, height 182-188
-
size 48, height 188-194
-
size 50, height 170-176
-
size 50, height 176-182
-
size 50, height 182-188
-
size 50, height 188-194
-
size 52, height 170-176
-
size 52, height 176-182
-
size 52, height 182-188
-
size 52, height 188-194
-
size 54, height 170-176
-
size 54, height 176-182
-
size 54, height 182-188
-
size 54, height 188-194
-
size 56, height 170-176
-
size 56, height 176-182
-
size 56, height 182-188
-
size 56, height 188-194
-
size 58, height 170-176
-
size 58, height 176-182
-
size 58, height 182-188
-
size 58, height 188-194
-
size 60, height 170-176
-
size 60, height 176-182
-
size 60, height 182-188
-
size 60, height 188-194
-
size 62, height 170-176
-
size 62, height 176-182
-
size 62, height 182-188
-
size 62, height 188-194
-
size 42, height 182-188
-
size 42, height 188-194
-
-
Size:
- 42
- 44
- 46
- 48
- 50
- 52
- 54
- 56
- 58
- 60
- 62
Height:
- 170-176
- 176-182
- 182-188
- 188-194
$9
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
Regular fit, straight, full-length men’s trousers. The front is with pleats and pockets. Slash pockets with a side yoke. The front pieces are lined, the lining runs below the knee. The back pieces of the trousers with two waist darts. The right back piece has a welt pocket with a buttonhole and a button. The waistband is straight, 4 cm wide, attached to the waist edge with 6 belt loops. The upper edge of the waistband is 5.0 below the natural waistline. The waist is additionally lowered on the front for the sizes from 54 to 62. The crotch is lowered by 3.5 cm (for all the heights of sizes 42-54) and by 4.5 cm (for all the heights of sizes 56-62). The trouser fasten with a zipper is in the centre front seam and a button with a buttonhole.
Model is wearing a size 48, height 188-194. Model parameters: Bust-line: 103 cm, Waist-line: 82 cm, Hips: 102 cm, Height: 188 cm. -
Waist-line: 8,0 сm.
Hips-line: 18,0 сm (including the width of the pleat on the front); 6,0 сm ((without the width of the pleat on the front). -
Size 42 44 46 48 50 52 54 56 58 60 62 Finished length along the side seam from waistband (without waistband), cm 97,0-110,5 97,0-110,5 97,0-110,5 97,0-110,5 97,0-110,5 97,0-110,5 97,0-110,5 97,0-110,5 97,0-110,5 97,0-110,5 97,0-110,5 Finished garment hem width, cm 55,0 56,0 57,0 58,0 59,0 60,0 61,0 62,0 63,0 64,0 65,0 -
Main fabric. For this garment we recommend using trousers and suiting fabrics which are easy to press. The fabric may be made out of natural, synthetic or blended fibre.
Lining material #1. We recommend smooth, silky and durable lining fabric for the front pieces’ lining and the saddle. The lining material should suit the characteristics of the shell fabric and can be made out of natural, synthetic or blended fibre.
Lining material #2. For the pocket lining we recommend using pocket lining fabric (pocketing fabric). You can also use cotton blend satin for the pocket lining.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material and fusible facing straightener. For example, you may use 55 g/m2 and 33 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density. -
Amount of Fabrics in metres.
Size 42 44 46 48 50 52 54 56 58 60 62 Main fabric, wide 140 cm 1,95-2,20 1,95-2,20 1,95-2,20 1,95-2,20 1,95-2,20 1,95-2,20 2,00-2,25 2,15-2,40 2,15-2,40 2,15-2,40 2,15-2,40
Size 42 44 46 48 50 52 54 56 58 60 62 Lining fabric #1, wide 140 cm 0,80-0,85 0,80-0,85 0,80-0,85 0,80-0,85 0,80-0,85 0,80-0,85 0,80-0,85 0,80-0,85 0,80-0,85 0,80-0,85 0,80-0,85
Size 42 44 46 48 50 52 54 56 58 60 62 Lining fabric #2, wide 140 cm (for lining of pocket) 0,40 0,40 0,40 0,40 0,40 0,40 0,45-0,50 0,45-0,50 0,50 0,50 0,50
Size 42 44 46 48 50 52 54 56 58 60 62 Interfacing (density 55 g/m2; width 150 cm) 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15 0,15
Size 42 44 46 48 50 52 54 56 58 60 62 Interfacing (density 33 g/m2; width 150 cm) 0,30 0,30 0,30 0,30 0,30 0,30 0,30 0,30 0,30 0,30 0,30
Size 42 44 46 48 50 52 54 56 58 60 62 Fusible on grain tape 0,80 0,80 0,80 0,80 0,80 0,80 0,80 0,80 0,80 0,80 0,80
Size 42 44 46 48 50 52 54 56 58 60 62 Stiffening tape 0,95 0,95 1,00 1,05 1,10 1,15 1,15 1,20 1,25 1,30 1,35
Size 42 44 46 48 50 52 54 56 58 60 62 Trousers’ kick tape 1,15 1,20 1,20 1,20 1,25 1,25 1,30 1,30 1,30 1,35 1,35
Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Accessories:
- Plastic zipper Type 4, length of 18 cm – 1 pcs.
- Sew-on metal trousers hook – 1 pcs.
- Buttons with the diameter of 15 mm – 3 pcs.
-
- Multipurpose sewing machine;
- 3 thread overlock machine;
- An iron with or without steam;
- Regular presser foot;
- Hinged cording foot;
- Wooden iron;
- Ironing desk or console table;
- Hand needle for basting;
- Machine needles №75-80 for the main fabric;
- Machine needles №70 for the lining;
- Paper scissors;
- Scissors for textile cutting.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.
All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.
