Men's trousers, pattern №1326
Slim-fit trousers, tapered toward the hem, featuring an offset side seam and vertical contour seams on the back panels. Front pockets with slanted openings; one back welt pocket. Zip fly and button closure. Detachable belt with buckle.
Difficulty: 4/5
Instructions with photo
Plotter 900 + А4/Letter
Sizes:
-
size 42, height 170-176
-
size 42, height 176-182
-
size 44, height 170-176
-
size 44, height 176-182
-
size 44, height 182-188
-
size 44, height 188-194
-
size 46, height 170-176
-
size 46, height 176-182
-
size 46, height 182-188
-
size 46, height 188-194
-
size 48, height 170-176
-
size 48, height 176-182
-
size 48, height 182-188
-
size 48, height 188-194
-
size 50, height 170-176
-
size 50, height 176-182
-
size 50, height 182-188
-
size 50, height 188-194
-
size 52, height 170-176
-
size 52, height 176-182
-
size 52, height 182-188
-
size 52, height 188-194
-
size 54, height 170-176
-
size 54, height 176-182
-
size 54, height 182-188
-
size 54, height 188-194
-
size 56, height 170-176
-
size 56, height 176-182
-
size 56, height 182-188
-
size 56, height 188-194
-
size 58, height 170-176
-
size 58, height 176-182
-
size 58, height 182-188
-
size 58, height 188-194
-
size 60, height 170-176
-
size 60, height 176-182
-
size 60, height 182-188
-
size 60, height 188-194
-
size 62, height 170-176
-
size 62, height 176-182
-
size 62, height 182-188
-
size 62, height 188-194
-
size 42, height 182-188
-
size 42, height 188-194
-
-
Size:
- 42
- 44
- 46
- 48
- 50
- 52
- 54
- 56
- 58
- 60
- 62
Height:
- 170-176
- 176-182
- 182-188
- 188-194
$8
$10
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
A small volume trousers, narrowed to the bottom, with a one-piece waistband, full length. There are waist darts and pockets with an inclined entrance and a cut-off side part on the front parts of the trousers. The back parts of trousers are with vertical princess seams from the waistline. There is a welt pocket on the right back part. The side seam from the hipline downwards is shifted to the front half of the trousers. The trousers are fastened with a zipper and a button with a button loop in the seam connecting the front parts. The waistline is lowered by 4.0 cm. In sizes 54 to 62, the front waistline is additionally lowered. The crotch seam is lowered by 4.0 cm. The trousers are complemented by a removable belt with a buckle. The belt is threaded through five belt loops located on a one-piece belt.
Model is wearing a size 48, height 182-188. Model parameters: Bust-line: 100 cm, Waist-line: 80 cm, Hips: 104 cm, Height: 183 cm.
-
Waist-line: 2.0 сm
Hips-line: 9.8 сm
-
Size 42 44 46 48 50 52 54 56 58 60 62 Finished length along the side seam 103,4-116,9 103,4-116,9 103,4-116,9 103,4-116,9 103,4-116,9 103,4-116,9 103,4-116,9 103,4-116,9 103,4-116,9 103,4-116,9 103,4-116,9 Finished garment hem width 36,4 37,6 38,8 40,0 4,2 42,4 43,6 44,8 46,0 47,2 48,4 -
Main fabric. We recommend using pantsuits and suit fabrics for this model. In terms of composition, these can be materials made of natural, synthetic or blended fibers.
Lining fabric. As a lining, for the details of the pocket lining, we recommend using pocket fabric or other lining fabrics suitable for pliable properties and density to the upper fabric made of natural, synthetic or blended fibers. Cotton satin can also be used as a pocket fabric.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 39 g/m2 and 55 g/m2, density 150 cm, width woven interfacing.
The density of the interfacing material depends on the main fabric density.
-
The amount of fabric in meters.
Size 42 44 46 48 50 52 54 56 58 60 62 Main fabric, wide 140 cm 1,50-1,75 1,60-1,80 1,65-1,80 1,70-1,90 1,80-2,00 1,90-2,10 1,95-2,10 1,95-2,20 1,95-2,20 1,95-2,20 2,00-2,20 Lining fabric, wide 140 cm 0,45
Interfacing (density 39 g/m2; width 150 cm) 0,25
Interfacing (density 55 g/m2; width 150 cm) 0,15 0,20
Bias fusible tape with reinforcement stitches 0,85 0,90 0,95 0,95 1,00 1,05 1,10 1,15 1,15 1,20 1,25 Fusible on grain tape 0,90-0,95
Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Accessories:
1. Twisted plastic zipper Type 3 or Type 4, 20 cm long – 1 pc.
2. Button with the diameter of 15-17 mm - 1 pc.
3. 40 mm inner diameter buckle - 1 pc. (for detachable belt).
4. Grommet 4-5 mm in diameter - 5 pcs.( for detachable belt). -
1. Multipurpose sewing machine;
2. 3 thread overlock machine;
3. An iron with or without steam;
4. Regular presser foot;
5. Hinged cording foot;
6. Wooden iron;
7. Ironing desk or console table;
8. Hand needle for basting;
9. Machine needles №75-80;
10. Paper scissors;
11. Scissors for textile cutting;
12. Snaps pressing machine to install accessories grommets, depending on the diameter.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.
