Men's windbreaker - bomber jacket, pattern №446

To set up printing of pattern N446 on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Men's windbreaker - bomber jacket pattern. Men's windbreaker - bomber jacket on the lining, small volume, length just above the hips. Patch-pockets on the front. Raglan sleeve with dart on the top, and also with elbow dart. Collar-neckband, cuffs and stitched waistband are made of knitwear. The hood with drawstring has cutting middle and side parts. The central clasp is on zipper tape. Inside on the left there is a patch-pocket with a flap, fastened to the button. 

The length of ready-made garment by the middle of the back without hood and collar in 50 size at growth 176-182 cm is 65,0 cm (gorge is made more profound to 0,5 cm), and without stitched waistband (the width of ready-made waistband is 6 cm). 

Stitch shaping by the chest is 7,0 cm (in total volume - 14,0 cm), stitch shaping by the waist is 13,0 cm (in total volume- 26,0 cm), stitch shaping by hips of front and back details is 5,0 cm (in total volume- 10,0 cm), stitch shaping to the shoulder circumference is 20 cm.

Fabric suggestion: Cloaking, jacket, and mixed fabrics; Lining fabrics; kashkorse or dense and thick knitwear for collar-neckband, sleeve cuffs and stitched waistband.

Fabric consumption: Fabric width is 140-150cm, the length of the top and finishing together (except knitwear) is 2,10 m – 2,40 m; the length of the top fabric (front, back, patch-pockets, flap, facing, facing of patch-pocket) is 1,10 m – 1,30 m; the length of finishing fabric (details of sleeve and hood) is 1,30 m – 1,50 m; the length of knitwear is 0,35 m – 0,45 m; the length of lining is 1,60 m -1,80 m. Fabric consumption is given with margin in case of sewing or cutting mistake.

Pattern pieces should be place on the fold of a piece of fabric.

Pattern is given with seam allowances.

Level of difficulty - “Advanced Beginner”

Sewing instruction is attached to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order will be in two print version:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns of top are located on a 2 sheet measuring 60 * 139 cm. The patterns of lining are located on a 2 sheet measuring 60 * 110 cm.

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.