Parka, pattern №303

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Parka pattern. Fully lined relaxed fit parka. The front with patch pockets at bottom and top with snap-flaps. The back has a centre seam. There are slits on the side seams. The neckline is finished with a hood. The hood consists of two side parts and a central part. The side parts of the hood have a facing. The front and back parts have fabric edging along the waistline, the hemline and the hood. Shirt sleeve is gathered at the bottom with elastic tape. Parka has hidden fastening with 12 snaps at center front.

General increases, laid in the pattern: Bust-line: 27,0 см, Waist: 50,0 см, Hips-line: 25,0 см, Shoulders:  18.5 см.

Finished back length along the center back seam, см.:  38 size: 103,6 – 109,6, 40 size: 103,8 – 114,8, 42 size: 104,0 – 115,0, 44 size: 104,2 – 115,2, 46 size: 104,4 – 115,4, 48 size: 104,6 – 115,6,  50 size: 104,8 – 116,8, 52 size: 105,0 – 117,0, 54 size: 105,2– 117,2

Fabric suggestion: for this particular garment we recommend to use thin jacket, raincoat or raincoat with hydrophilic membranes fabrics. Lining fabrics content can be synthetic with man-made fibers. 

Main fabric, wide 140 cm: 38 size: 3,5 - 3,7м, 40,42 size: 3,5 - 3,8м, 44,46 size: 3,6 – 3,9м, 48-54 size: 3,7 -4,0м

Lining fabric, wide 140 cm: 38 size: 2,0 – 2,1м, 40,42 size: 2,0 – 2,2 м, 44,46,48 size: 2,1 – 2,3 м., 50,52,54 size: 2,3 - 2,5 м.

Pattern is given with seam allowances.

Degree of difficulty - “Intermediate”

The photo shows a parka sewed at the GRASSER  for pattern N303

Model is wearing a parka size 42, height 170-176. Model parameters: Bust-line: 82, waist-line: 61, Hips:  91, height 175

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• An iron with or without steam;
• Regular presser foot;
• Wooden iron;
• Ironing desk or console table;
• Sleeve board;
• Hand needle for basting;
• Machine needles №80 MICROTEX (extra sharp for raincoat fabrics);
• Paper scissors;
• Scissors for textile cutting;
• Eyelet press for installing eyelets and press studs, depending on the diameter.

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. Details of top for size 54 are located on 2 sheets 60x192 см. Details of lining for size 54 are located on sheet 60x280 см.

A test square for checking the plotter scale is located on the pattern sheet.