Raincoat, pattern №744

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Raincoat pattern. Regular fit, A-line, calf-length lined trench coat. The front has a press-stud fastening in the centre with 10 press studs and welt pockets with decorative flaps. Bust darts were transferred into the neckline gathering. The back has a centre seam, the shoulder darts were transferred into the neckline gathering. The set-in long sleeve has one seam and a light gathering at its lower edge. The sleeve lower edge is finished with a cuff fastened with 1 press stud. The sleeve has no slit, however, there is a little gap on the sleeve lower edge for an easier passing of the hand through the sleeve. The shoulder line is 5 cm dropped from the shoulder point. Standing collar. The garment is designed with a voluminous belt with a buckle, the belt loops are attached at the level of the waistline.

General increases, laid in the pattern: Bust-line: 24 см; Hips-line: 25 см, Shoulders: 17,5 + model’s widening.

Fabric suggestion: we recommend to use for this garment natural or synthetic waterproof fabrics or blends. The fabric can be made with various treatment and waterproof coatings. Lining fabrics - rayon, silk.

Main fabric, wide 140 cm: 38 size: 2,80-2,95 м, 40,42 size: 2,85-3,00м, 44,46 size: 2,90-3,05м, 48-52 size: 2,95-3,10м

Lining fabric, wide 140 cm: 38,40,42 size: 1,95-2,15м, 44-52 size: 2,50-2,70 м.

Pattern is given with seam allowances.

Degree of difficulty - “Advanced”

The photos shows a trench coat sewed at the GRASSER  for pattern №744

Model is wearing size 42, height 170-176. Model parameters: Bust-line: 82см, waist-line: 59см, Hips:  90см, height 170см

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• The iron with the heat – for wet-heat treatment of the lining;
• Ironing desk or console table – or wet-heat treatment of the lining;
• Two-legged machine foot, walking or Teflon machine foot (depending on the raincoat fabric type),
• One-legged machine foot;
• Hand needle for basting;
• Machine needles Microtex №80;
• Paper scissors;
• Scissors for textile cutting.
• Yelet press for installing eyelets and press studs, depending on the diameter.

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. Details of top for size 52 are located on 2 sheets 183x60 см. Details of lining for size 52 are located on sheet 307x60 см.

A test square for checking the plotter scale is located on the pattern sheet.