Raincoat, pattern №745

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Raincoat pattern. Trenchcoat of medium volume, straight silhouette, hits below the knee, lined, with a removable hood. The front has a central fastening with seven buttons and seven buttonholes; with welt pockets with flap and one pocket facing. The back has a slit in the centre seam and a loose yoke.

Raglan sleeve, long, with two seams, there is a sleeve strap at the bottom of the sleeve with a fastener for 1 buttonhole and 1 button.
The garment has a standing turn-down collar with a neckband. The hood is of moderate volume, with a cut central part, in the front section of the hood there is a drawstring with a flat cord for smooth adjustment of fit. To bring the ends of the cord to the right side, eyelets are installed at the front edge of the hood at the chin level. The hood is removable; it is fastened just above the neckline of the garment with five buttonholes and five buttons.
The garment has a removable self-belt with a buckle, beltloops are stitched at the waistline at the side seams. The hood and the straps are double-sided.

General increases, laid in the pattern: Bust-line: 24 см; Hips-line: 10 см, Shoulders: 21cm.

Fabric suggestion: we recommend to use raincoat fabrics of medium density with natural, synthetic or mixed fibres. The fabrics can be water-repellent or water-resistant. For the hood lining, straps, hood cord you can use thin raincoat or puffer-coat fabrics with a hydrophilic membrane. Linings – viscose, silk.

Main fabric, wide 140 cm: 38,40 size: 3,25-3,40 м, 42,44,46 size: 3,30-3,45 м, 48-52 size: 3,35-3,50м

Additional fabric, wide 140 cm: 38-52 size: 0,70 м 

Lining fabric, wide 140 cm: 38,40,42 size: 1,95-2,15м, 44-52 size: 2,00-2,20 м.

Pattern is given with seam allowances.

Degree of difficulty - “Advanced”

The photos shows a raincoat sewed at the GRASSER  for pattern №745

Model is wearing size 42, height 170-176. Model parameters: Bust-line: 82см, waist-line: 59см, Hips:  90см, height 170см

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• An iron with or without steam;
• Regular presser foot;
• Wooden iron;
• Sleeve board;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles №90 for the main fabric;
• Machine needles №80 for the lining;
• Paper scissors;
• Scissors for textile cutting;
• Eyelet press for installing eyelets and press studs, depending on the diameter.

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. Details of top for size 52 are located on 2 sheets 60 x 215 см. Details of lining for size 52 are located on sheet 60 x 175 см.

A test square for checking the plotter scale is located on the pattern sheet.