Raincoat, pattern №910

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Raincoat pattern. A small volume lined raincoat has a semi-fitting silhouette, expanded to the bottom. The length of the garment is below the calf. The central side clasp has 5 snaps. The upper parts of the front and back details consist of a yoke, central and side parts. The lower parts of the front and back consist of central and side parts. The lower part of the front has a welt pocket with a zipper tape. The middle seam of the lower part of the back has the vent. The sleeve is sewn in with the double-seam. The sleeve length is below the wrist. The lower edge of the sleeve is finished with an attached cuff. The upper part of the sleeve has a slit processed with a zipper tape. The English collar has a cut-off collar stand. The collar ends are wider than the lapel ledge. The raincoat is complemented by a removable belt consisting of two parts. Belt has a closure with 2 snaps. The belt is threaded into two loops located along the side seams.

Eases added to a pattern, cm:  Bust-line: 8,3 сm; Waist-line: 18,2 cm; Hips-line: 12,5 (in the sizes 38–52), 14,5 (in the sizes 54–56); Shoulders: 8,1 cm.

Finished back length along the center back seam, см: 38 size: 118,2-126,3; 40,42 size: 118,3-134,6; 44,46 size: 118,4-134,7; 48,50 size: 118,5-134,8; 52,54 size: 118,6-134,9; 56 size: 118,7-135,0.

Fabric suggestion: we recommend using natural, artificial leather and suede, raincoat fabrics for this model, with or without various types of impregnations. For this model, you can use denim fabrics, velvet, thin and medium-density coat fabrics with a variety of textures and densities. In terms of the composition, these can be materials made of natural, synthetic, or mixed fibers. As a lining, you can use materials suitable for pliable properties and density to the upper material made of natural, synthetic, or mixed fibers.

Main fabric, wide 140 cm: 38 size: 2,55-2,70 м; 40 size: 2,60-2,90 м; 42 size: 2,65-3,00 м; 44 size: 2,75-3,05 м; 46 size: 2,75-3,15 м; 48 size: 2,80-3,15 м; 50 size: 2,90-3,25 м; 52 size: 2,95-3,30 м, 54 size: 3,05-3,40 м, 56 size: 3,10-3,50 м.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Pattern is given with seam allowances.

Degree of difficulty - "Advanced”

The photos shows a raincoat sewed at the GRASSER  for pattern №908

Model is wearing a size 44, height 176-182. Model parameters: Bust-line: 88 см, Waist-line: 63,5 см, Hips: 90 см, height 179 см

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• An iron with or without steam;
• Regular presser foot;
• Hinged cording foot;
• Teflon machine foot;
• Wooden iron;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles №80-90 for the main fabric;
• Machine needles №70 for the lining;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.