The photo also shows: skirt on pattern №1320
Shirt, pattern №1319
A relaxed-fit shirt featuring front and back yokes, batwing sleeves, a curved hemline, a button-front closure, and a classic shirt collar.
Difficulty: 3/5
Instructions with photo
Plotter 900 + А4/Letter
Sizes:
-
size 38-40, height 152-158
-
size 38-40, height 158-164
-
size 38-40, height 164-170
-
size 38-40, height 170-176
-
size 38-40, height 176-182
-
size 42-44, height 152-158
-
size 42-44, height 158-164
-
size 42-44, height 164-170
-
size 42-44, height 170-176
-
size 42-44, height 176-182
-
size 46-48, height 152-158
-
size 46-48, height 158-164
-
size 46-48, height 164-170
-
size 46-48, height 170-176
-
size 46-48, height 176-182
-
size 50-52, height 152-158
-
size 50-52, height 158-164
-
size 50-52, height 164-170
-
size 50-52, height 170-176
-
size 50-52, height 176-182
-
size 54-56, height 152-158
-
size 54-56, height 158-164
-
size 54-56, height 164-170
-
size 54-56, height 170-176
-
size 54-56, height 176-182
-
size 58-60, height 152-158
-
size 58-60, height 158-164
-
size 58-60, height 164-170
-
size 58-60, height 170-176
-
size 58-60, height 176-182
-
-
Size:
- 38-40
- 42-44
- 46-48
- 50-52
- 54-56
- 58-60
Height:
- 152-158
- 158-164
- 164-170
- 170-176
- 176-182
$8.10
$9
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
A loose-fitting shirt with a straight silhouette, length below the hip line, with a curly bottom line. The length of the front is shorter than the length of the back. The shoulder line is lowered by 23.8-28.8 cm (depending on the size of the garment). The front has a yoke and a princess seam from the side seam, located below the waistline and directed diagonally to the bottom line. The back has a yoke and a curly division above the waistline. The closure is a central side with one-piece plackets for 7 button loops and 7 buttons. The sleeve is sewn in, single-seam, shirt-type, and with a length below the wrist line. The lower edge of the sleeve has two soft pinched pleats, treated with an attached cuff. The sleeve slit is decorated with a sleeve placket. The cuff is fastened with 1 button loop and 1 button. The collar is shirt type with a cut-off stand and with a closure for 1 button loop and 1 button.
Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 85 cm, Waist-line: 63 cm, Hips: 93 cm, Height: 172 cm.
-
Waist-line: 43.0 сm + model’s widening
Hips-line: 42.5 сm
Shoulders:
Size 38-40 42-44 46-48 50-52 54-56 58-60 20,2-22,4 19,3-21,5 18,4-20,6 17,7-19,9 18,0-20,2 18,0-20,2
-
Size 38-40 42-44 46-48 50-52 54-56 58-60 Finished back length along the center back 68,6-76,9 68,8-77,1 68,9-77,2 69,1-77,4 69,2-77,5 69,4-77,7
Finished sleeve length (including cuff) 36,6-44,2 36,4-44,0 36,2-43,8 36,0-43,6 35,9-43,5 35,7-43,3
-
Main fabric. For this model, we recommend using pliable, elastic, draping, shirt, blouse fabrics, without stretching or with slight stretching, thin or medium density made of natural, synthetic or blended fibers. Various cotton and linen fabrics with a variety of textures are suitable for this model.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 33 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.
-
The amount of fabric in meters.
Size 38-40 42-44 46-48 50-52 54-56 58-60 Main fabric, wide 140 cm 1,60-1.70 1,65-1,85 1,75-1,90 1,85-2,00 1,90-2,10 2,00-2,15 Interfacing (density 33-39 g/m2;width 150 cm) 0,15
Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Accessories:
Button with the diameter of 10-12 mm - 10 pcs. -
Multipurpose sewing machine;
3 thread overlock machine;
An iron with or without steam;
Regular presser foot;
Wooden iron;
Ironing desk or console table;
Hand needle for basting;
Machine needles №70-80;
Paper scissors;
Scissors for textile cutting.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.
