Swimsuit top, pattern №926

Swimsuit top pattern. A top has length above the waistline and a partial lining. The shoulder is reduced relative to the final shoulder point. There is a zipper in the center of the front part. The zipper’s length is to the chest line. The top has an elastic braid along the bottom, armholes and neckline edges of the back.

Eases added to a pattern, cm:  Bust-line: 38 size: -11,2 см, 40 size: -12,2 см, 42 size: -12,6 см, 44 size: -13,0 см, 46 size: -12,9 см, 48 size: -12,4 см, 50 size: -12,3 см, 52 size: -12,2 см, 54 size: -11,7 см, 56 размер: -12,1 см.

Finished length along the center of the back, сm: 38 size: 26,0, 40 size: 26,5, 42 size: 27,0, 44 size: 27,5, 46 size: 28,5, 48 size: 29,0,  50 size: 29,5, 52 size: 30,0, 54 size: 30,5, 56 size: 31,0.

Finished length along the center of the front, сm: 38 size: 22,0, 40 size: 23,0, 42 size: 23,0, 44 size: 24,0, 46 size: 26,0, 48 size: 29,0,  50 size: 30,0, 52 size: 31,0, 54 size: 32,0, 56 size: 33,0.

Fabric suggestion: we recommend using synthetic elastic materials for this model, for example, lycra, microfiber, biflex. Give preference to wear-resistant materials that are resistant to water in open and closed reservoirs. For lining, you can use the upper material or a less dense synthetic material suitable for pliable properties to the upper material. We recommend to use a latex elastic band because it remains elastic longer when a garment is continuously used in the water.

Amount of main fabric, wide 140/180 cm: 38-44 size: 0,40 м, 46 size: 0,45 м, 48-50 size: 0,50 м, 52 size: 0,60 м, 54 size: 0,65 м, 56 size: 0,85 м.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Pattern is given with seam allowances.

Degree of difficulty - "Intermediate”

The photos shows a swimsuit top sewed at the GRASSER  for pattern №926

The photo also shows: panties on pattern №927

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• 4 thread overlock machine;
• An iron with or without steam;
• Regular presser foot;
• Wooden iron;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles Stretch №70-80 or Super Stretch №70-80;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.