Trousers, pattern №950

Trousers pattern. Men’s trousers of the moderate volume are slightly narrowed from the knee line to the bottom, ankle-length, the waist line is lowered by 4 cm. The front parts of the trousers with a decorative (false) fly piece; trousers have side pockets with an inclined entrance; on the left side there is an upper patch pocket with an inclined entrance, the shaped flap fastens with two snaps, in the lower part of the pocket there is a decorative detail with 3 voluminous pleats-holders. At the hip level, there are side patch pockets with one-sided pleats and a side part with a flap that fastens with two snaps. The back parts of the trousers have horizontal formative parts just above the knee level; with patch pockets with a flap that fastens with two snaps. The width of the trousers at the bottom is adjusted by means of a strap that fastens with a snap (2 additional downside parts of the snaps are installed on the back part of the trousers). Trousers have an attached belt with elastic tape and 4 belt loops with half-rings on the bottom edge.

Eases added to a pattern, cm: Waist-line: 22,0 (tight fitting due to the attached waistband with elastic band), Hips-line: 11,0

Finished length along the side seam from waistband: 44 size: 100,3-113,8, 46 size: 100,5-114,0, 48 size: 100,7-114,2, 50 size: 100,9-114,4, 52 size: 101,1-114,6, 54 size: 101,3-114,8, 56 size: 101,5-115,0, 58 size: 101,7-115,2, 60 size: 101,9-115,4, 62 size: 102,1-115,6.

Fabric suggestion: For this model, we recommend using thin and medium-thin costume, dress-suit fabrics without stretching or with a slight stretch made of natural, synthetic or mixed fibers. For this model, you can use cotton, linen, wool, denim fabrics with a variety of textures and densities. Cotton fabric for the pocket lining: shirt, dress, “pocket” fabrics. For sewing this garment, we used satin-weave dress-suit cotton with a density of 170 g/m2, and a width of 145 cm.

Main fabric, wide 140 cm: 44 size: 1,75-1,90 m, 46 size: 1,80-1,95 m, 48 size: 1,85-2,00 m, 50 size: 1,90-2,05 m, 52-54 size: 1,95-2,10 m, 56 size: 2,00-2,20m, 58-60 size: 2,05-2,25 m, 62 size: 2,10-2,30m.

Lining fabric, wide 140 cm: 44-48 size: 0,35 m, 50-60 size: 0,35-0,40 m, 62 size: 0,35 m.

Interfacing (density 18 g/m2; width 150 cm: 44-62 size: 0,30 m.

Fusible on grain tape: 44-62 size: 0,45 m.

Elastic band, 4 cm wide: 44 size: 0,70 m; 46 size: 0,75 m, 48 size: 0,80 m, 50 size: 0,85 m, 52 size: 0,90 m, 54 size: 0,95 m, 56 size: 1,00 m, 58 size: 1,05 m, 60 size: 1,10 м, 52 size: 1,15 m.

Garment accessories: 1. Snap buttons with the diameter of 12,5 mm – 16 pcs. 2. Half rings for belt loop, wide 2,5 сm – 4 pcs. 3. Elastic band, wide 4 сm.

Degree of difficulty - "Intermediate” 

The photos shows a trousers sewed at the GRASSER  for pattern №950

Model is wearing a size 52, height 182-188. Model parameters: Bust-line: 104 cm, waist-line: 80 cm, Hips: 97 cm

The photo also shows: sweatshirt on pattern №52, t-shirt №955

For sewing you will need the following equipment: 

Multipurpose sewing machine; 3 thread overlock machine; An iron with or without steam; Regular presser foot; Wooden iron; Ironing desk or console table; Hand needle for basting; Machine needles №90-100; Paper scissors; Scissors for textile cutting; Eyelet press for installing press studs, depending on the diameter

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.