Trousers, pattern №951

Trousers pattern. Slim fit, narrow-hem, full-length men’s trousers. The front pieces feature slash pockets with diagonal opening and a cut-off side piece. The front pieces of the trousers are lined up to the area below the knee. The back features waist darts. The right back piece has a double welt pocket fastened with a loop and a button. The waistband is sewn-on, straight, 4 cm wide with 6 belt loops. The trousers are fastened with a zipper, sewn into the centre front seam. A hook and loop on the waistband. The waistline is lowered by 7.5 cm. The waistline was additionally lowered for the sizes 54 - 62.

Eases added to a pattern, cm: Waist-line: 1,2, Hips-line: 1,7

Finished length along the side seam from waistband, сm: 44-62 size: 95,1-108,7.

Finished garment hem width, сm: 44 size: 40,0, 46 size: 41,0, 48 size: 42,0, 50 size: 43,0, 52 size: 44,0, 54 size: 45,0, 56 size: 46,0, 58 size: 47,0, 60 size: 48,0, 62 size: 49,0.

Fabric suggestion: We recommend easily pressed trousers or suiting fabrics for this garment. The composition of the fabric may consist of natural fibre, synthetic or blended fibre. We recommend smooth, silky and durable lining fabric for the front pieces’ lining and the saddle. The lining material should suit the characteristics of the shell fabric and can be woven out of natural fibre, synthetic or blended fibre. For the pocket lining we recommend using pocket lining fabric (pocketing fabric). You can also use cotton blend satin for the pocket lining.

Main fabric, wide 140 cm: 44 size: 1,20-1,35 m, 46 size: 1,25-1,40 m, 48 size: 1,35-1,45 m, 50 size: 1,35-1,55 m, 52 size: 1,40-1,60 m, 54 size: 1,60-1,80 m, 56 size: 1,70-2,05 m, 58-60 size: 1,85-2,10 m, 62 size: 1,90-2,15 m.

Lining fabric №1, wide 140 cm: 44-62 size: 0,75-0,85 m.

Lining fabric №1, wide 140 cm (for lining of pocket): 44 size: 0,35-0,40 m, 46 size: 0,40-0,45 m, 48-58 size: 0,45 m, 60-62 size: 0,50 m.

Interfacing (density 55 g/m2; width 150 cm): 44-48 size: 0,55 m, 50-54 size: 0,60 m, 56-58 size: 0,65 m, 60-62 size: 0,70 m.

Interfacing (density 34 g/m2; width 150 cm): 44-62 size: 0,30 m.

Fusible on grain tape: 44-62 size: 0,80 m.

Stiffening tape: 44 size: 0,90 m, 46 size: 0,95 m, 48-50 size: 1,00 m, 52 size: 1,05 m, 54 size: 1,10 m, 56 size: 1,15 m, 58-60 size: 1,20 m, 62 size: 1,25 m.

Trousers’ kick tape: 44 size: 0,90 m, 46-50 size: 0,95 m, 52-56 size: 1,00 m, 58-62 size: 1,05 m.

Garment accessories: 1. 18 cm spiral zipper №4 – 1 pcs. 2. Metal trouser hoo – 1 pcs. 3. Buttons with the diameter of 15 mm – 3 pcs. 4. Stiffening tape. 5. Trousers’ kick tape.

Degree of difficulty - "Advanced” 

The photos shows a trousers sewed at the GRASSER  for pattern №951

Model is wearing a size 52, height 182-188. Model parameters: Bust-line: 104 см, waist-line: 80 см, Hips: 97 см.

The photo also shows: shirt on pattern №60

For sewing you will need the following equipment: 

Multipurpose sewing machine; 3 thread overlock machine; An iron with or without steam; Regular presser foot; Hinged cording foot; Ironing desk or console table; Machine needles №75-80 for the main fabric; Machine needles №70 for the lining; Hand needle for basting; Paper scissors; Scissors for textile cutting.     

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.