Coat and jacket, pattern №782

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

---

Jacket and coat pattern. A medium volume coat/jacket with the straight silhouette, the coat is with the mid-calf length, jacket is with length below the hip line, with insulation and lining. The front has a cut-off central part with a one-piece stand collar; with an offset side clasp for 3 (jacket)/5 (coat) hidden sewn magnetic snaps and an internal clasp for 2 hinged loops and 2 buttons. The side seams have pockets. The sleeve is set-in, long, single seam, the bottom is finished with an attached cuff with elastic tape. The garment is with the lowered shoulder line by 10 cm relative to the shoulder point. The garment is supplemented with a removable belt with a buckle (jacket), without a buckle (coat), at waist level the belt loops in the side seams.

General increases, laid in the pattern:

*Constructive ease (Ec)*: Bust-line: 24,5 см, Waist: 41,5 см, Hips-line: 28,0 см, Shoulders: 19,5 см

*Ease of package (Ep)*: Bust-line: 6,0 см; Waist-line: 6,0 см; Hips-line: 6,0 см; Shoulders:  6,0 см.

*Ease of freedom (Ef): (Pay attention to this increase in order to estimate the garment volume!): Bust-line: 18,5  см; Waist-line: 35,5 см; Hips-line: 22,0 см; Shoulders:  13,5 см.

*Constructive ease (Ec) – an integral part of a constructive segment that increases or decreases the size attribute, takes into account the thickness of the garment package, the freedom between the body and clothing, fashion direction, silhouette, physiological, hygienic and dynamic requirements, and is always included in the size parameters of the finished garment.

*Ease of package (Ep) – this value takes into account the thickness of all layers of clothes material worn on a person, which consists of ease for inner package, taking into account the underlying layers at designing clothes, and an ease of the outer package (package for designing garment).

*Ease of freedom (Ef) – ease that is necessary to ensure a person's freedom of breathing and movement, creating an air layer that regulates heat exchange and skin respiration under clothing.

*Ec = Ep + Ef

JACKET. Finished back length along the center back seam, см.:  38 size: 64,6-72,6, 40 size: 64,8-72,8, 42 size: 65,0-73,0, 44 size: 65,2-73,2, 46 size: 65,2-73,2, 48 size: 65,6-73,6,  50 size: 65,8-73,8, 52 size: 66,0-74,0, 54 size : 66,2-74,2, 56 size: 66,4-74,4

COAT. Finished back length along the center back seam, см.:  38 size: 107,6-140,6, 40 size: 107,8-140,8, 42 size: 107,0-121,0, 44 size: 107,0-121,0, 46 size: 107,4-141,4, 48 size: 107,6-141,6,  50 size: 107,8-141,8, 52 size: 108,0-142,0, 54 size: 108,2 - 142,2, 56size: 108,4- 142,4

Fabric suggestion: for this model we recommend using thin raincoat, jacket fabrics, raincoat fabrics with the hydrophilic membrane; the new generation synthetic insulation material with a protective layer on both sides, for example, ISOSOFT 34 200 g/m2. Lining fabrics - viscose, silk.

Material consumption for jacket:

Main fabric, wide 140 cm: 38-40 size: 3,25-3,45 м, 42,44 size: 3,30-3,50м, 46 size: 3,35-3,55м, 48 size: 3,40-3,60м, 50-56 size: 3,45-3,65м 

Lining fabric, wide 140 cm: 38-40 size: 1,50-1,55 м, 42-48 размер: 1,50-1,60м, 50-56 size: 1,65-1,80м

Insulation, wide 140см: 38-46 size: 2,50-2,70 м., 48-56 size: 2,80-3,00 м.

Material consumption for coat:

Main fabric, wide 140 cm: 38-40 size: 4,10-4,40 м, 42,44 size: 4,15-4,45 м, 46 size: 4,20-4,50 м, 48 size: 4,25-4,55, 50-56 size: 4,30-4,60м 

Lining fabric, wide 140 cm: 38-40 size: 1,80-2,05 м, 42-48 size: 1,85-2,10м, 50 size: 1,85-2,20 м, 52-56 size: 2,50-2,80м

Insulation, wide 140см: 38-44 size: 3,70-3,90 м, 46 size: 3,80-4,00м, 48-56 size: 4,10-4,30 м.

Pattern is given with seam allowances.

Degree of difficulty - “Advanced”

---

The photos shows a coat and jacket sewed at the GRASSER  for pattern №782

Model is wearing a size 42, height 170-176.  Model parameters: Bust-line: 85, waist-line: 63, Hips: 90, height 175.

---

The images in the photo also show: skirt on pattern №729

---

In the gallery under the main photo and in the video below you can see a 3D visualization - this is how the jacket will look in sizes 38 and 52.

---

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

For sewing you will need the following equipment:

• Multipurpose sewing machine (with stitch the button loops);
• An iron with or without steam;
• Regular presser foot;
• Wooden iron;
• Ironing desk or console table;
• Sleeve board;
• Hand needle for basting;
• Machine needles №90 for the main fabric;
• Machine needles №70 for the lining;
• Paper scissors;
• Scissors for textile cutting.

---

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. Details of top for size 52 are located on 2 sheets 60*220см. Details of lining for size 52 are located on sheet 60*154см

A test square for checking the plotter scale is located on the pattern sheet.