Jacket, pattern №1321
Difficulty: 4/5
Instructions with photo
Plotter 900 + А4/Letter
Sizes:
-
size 38, height 152-158
-
size 38, height 158-164
-
size 38, height 164-170
-
size 40, height 152-158
-
size 40, height 158-164
-
size 40, height 164-170
-
size 40, height 170-176
-
size 40, height 176-182
-
size 42, height 152-158
-
size 42, height 158-164
-
size 42, height 164-170
-
size 42, height 170-176
-
size 42, height 176-182
-
size 44, height 152-158
-
size 44, height 158-164
-
size 44, height 164-170
-
size 44, height 170-176
-
size 44, height 176-182
-
size 46, height 152-158
-
size 46, height 158-164
-
size 46, height 164-170
-
size 46, height 170-176
-
size 46, height 176-182
-
size 48, height 152-158
-
size 48, height 158-164
-
size 48, height 164-170
-
size 48, height 170-176
-
size 48, height 176-182
-
size 50, height 152-158
-
size 50, height 158-164
-
size 50, height 164-170
-
size 50, height 170-176
-
size 50, height 176-182
-
size 52, height 152-158
-
size 52, height 158-164
-
size 52, height 164-170
-
size 52, height 170-176
-
size 52, height 176-182
-
size 54, height 152-158
-
size 54, height 158-164
-
size 54, height 164-170
-
size 54, height 170-176
-
size 54, height 176-182
-
size 56, height 152-158
-
size 56, height 158-164
-
size 56, height 164-170
-
size 56, height 170-176
-
size 56, height 176-182
-
-
Size:
- 38
- 40
- 42
- 44
- 46
- 48
- 50
- 52
- 54
- 56
Height:
- 152-158
- 158-164
- 164-170
- 170-176
- 176-182
$8.30
$11
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
This is a loose-fitting, straight-silhouette jacket, falling below the hip line, fully lined. The jacket features a centre front closure with three buttonholes and three buttons. A bellows patch pocket with a flap is located on the lower front. The flaps are secured with two hidden press studs (snaps) on the underside. The back features shoulder darts. A casing is topstitched on the front and back below the waistline, with a self-fabric drawstring for an adjustable fit. The drawstring exits to the outside of the garment at the centre front. The sleeves are set-in, full-length, and two-piece. A detachable strap with a buckle is located at the sleeve hem for width adjustment. The strap is threaded through two loops positioned 5 cm above the sleeve hem. The front neckline is square-shaped and finished with a turn-down collar with a separate stand.
Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 85 cm, Waist-line: 63 cm, Hips: 93 cm, Height: 172 cm.
-
Bust-line: 28,6 сm
Hips-line: 29,0 сm
Shoulders:
12,7 сm (for sizes 38-56 in the height 152-158)
13,2 сm (for sizes 38-56 in the height 58-164)
13,7 сm (for sizes 38-56 in the height 164-170)
14,2 сm (for sizes 40-56 in the height 170-176)
14,7 сm (for sizes 40-56 in the height 176-182)
-
Size 38 40 42 44 46 48 50 52 54 56 Finished back length along the center back 69,0-73,2 69,2-77,6 69,3-77,7 69,5-77,9 69,6-78,0 69,8-78,2 69,9-78,3 70,1-78,5 70,2-78,6 70,4-78,8 Finished sleeve length 56,4-60,4 56,5-64,5 56,6-64,6 56,8-64,8 56,9-64,9 57,1-65,1 57,2-65,2 57,4-65,4 57,5-65,5 57,6-65,6
-
Main fabric. For this garment, we recommend using medium-weight shell fabrics, such as rainwear or outerwear fabrics. These can be with or without waterproof coatings, water-repellent (DWR) finishes, or membranes. Suitable fabrics may consist of natural, synthetic, or blended fibres.
Lining fabric. For the lining, use fabrics that match the main fabric in drape and weight, made from natural, synthetic, or blended fibres.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 33-34 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.
-
The amount of fabric in meters.
Size 38 40 42 44 46 48 50 52 54 56 Main fabric, wide 140 cm 1,80-1,90 1,85-1,95 1,90-2,00 1,95-2,10 2,00-2,10 2,05-2,20 2,10-2,25 2,15-2,30 2,20-2,35 2,25-2,40 Lining fabric, wide 140 cm 1,35-1,40 1,35-1,45 1,35-1,50 1,35-1,55 1,40-1,55 1,40-1,55 1,40-1,55 1,45-1,55 1,45-1,60 1,45-1,65 Interfacing (density 33-34 g/m2; width 150 cm) 0,85-0,90 0,85-0,95 0,85-0,95 0,85-0,95 0,85-0,95 0,90-0,95 0,90-0,95 0,90-0,95 0,90-1,00 0,90-1,00 Bias fusible tape with reinforcement stitches 2,05-2,15 2,05-2,25 2,10-2,25 2,10-2,30 2,15-2,30 2,15-2,35 2,20-2,35 2,20-2,35 2,20-2,40 2,25-2,40 Fusible on grain tape 1,00 1,00 1,05 1,05 1,05 1,10 1,10 1,10 1,10 1,15
Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Accessories:
Snap button with the diameter of 12.5-15 mm - 4 pcs. (for pocket);
Button with the diameter of 22-25 mm - 3 pcs. (for a center closure);
30 mm inner diameter buckle - 2 pcs. (for sleeve strap);
Cord locks (if desired) – 2 pcs.
-
Multipurpose sewing machine;
An iron with or without steam;
Regular presser foot;
Wooden iron;
Ironing desk or console table;
Hand needle for basting;
Machine needles №75-80 for the main fabric;
Machine needles №70 for the lining;
Paper scissors;
Scissors for textile cutting;
Snaps pressing machine to install accessories press studs, depending on the diameter.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.