Jacket, pattern №1365
Lined jacket with raglan sleeves, a snap closure, a stand collar, and a hood. Front patch pockets, a drawstring casing at the hem, and a cuff tab at the sleeve hem.
Difficulty: 4/5
Instructions with photo
Plotter 900 + А4/Letter
Sizes:
-
size 38, height 152-158
-
size 38, height 158-164
-
size 38, height 164-170
-
size 40, height 152-158
-
size 40, height 158-164
-
size 40, height 164-170
-
size 40, height 170-176
-
size 40, height 176-182
-
size 42, height 152-158
-
size 42, height 158-164
-
size 42, height 164-170
-
size 42, height 170-176
-
size 42, height 176-182
-
size 44, height 152-158
-
size 44, height 158-164
-
size 44, height 164-170
-
size 44, height 170-176
-
size 44, height 176-182
-
size 46, height 152-158
-
size 46, height 158-164
-
size 46, height 164-170
-
size 46, height 170-176
-
size 46, height 176-182
-
size 48, height 152-158
-
size 48, height 158-164
-
size 48, height 164-170
-
size 48, height 170-176
-
size 48, height 176-182
-
size 50, height 152-158
-
size 50, height 158-164
-
size 50, height 164-170
-
size 50, height 170-176
-
size 50, height 176-182
-
size 52, height 152-158
-
size 52, height 158-164
-
size 52, height 164-170
-
size 52, height 170-176
-
size 52, height 176-182
-
size 54, height 152-158
-
size 54, height 158-164
-
size 54, height 164-170
-
size 54, height 170-176
-
size 54, height 176-182
-
size 56, height 152-158
-
size 56, height 158-164
-
size 56, height 164-170
-
size 56, height 170-176
-
size 56, height 176-182
-
-
Size:
- 38
- 40
- 42
- 44
- 46
- 48
- 50
- 52
- 54
- 56
Height:
- 152-158
- 158-164
- 164-170
- 170-176
- 176-182
$11
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
A loose‑fitting jacket, A‑line silhouette, hip‑length, lined. The closure has attached plackets with 7 snap fasteners. The front has patch pockets with flaps. Additionally, a second decorative flap is located above the pocket. The back has a center box pleat. On the front and back, a casing is located along the hemline, allowing the fit to be adjusted with a drawstring. The drawstring is brought to the right side through eyelets. The sleeves are raglan‑cut, with an upper and lower seam, full length. In the lower part of the sleeve, a strap with a 2‑snap closure is positioned to adjust the volume. The round neckline is finished with a high collar band with a hood. A casing is located along the upper edge of the collar, allowing the fit to be adjusted with a drawstring. The drawstring is brought to the right side through eyelets. The hood is of moderate volume with a center part.
Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 84 cm, Waist-line: 65 cm, Hips: 93 cm, Height: 172 cm.
-
Bust-line: 39,0 сm
Hips-line:
54,0 сm (for all sizes of height 152-158)
55,0 сm (for all sizes of height 158-164)
56,0 сm (for all sizes of height 164-170)
57,0 сm (for all sizes of height 170-176)
58,0 сm (for all sizes of height 176-182)
Shoulders: 26,5 сm
-
Size 38 40 42 44 46 48 50 52 54 56 Finished back length along the center back 60,8-65,0 60,9-69,3 61,0-69,4 61,1-69,5 61,2-69,6 61,3-69,7 61,4-69,8 61,5-69,9 61,6-70,0 61,7-70,1 The sleeve length from the neckline to the line of the finished view 70,0-74,3 70,4-79,0 70,8-79,4 7,2-79,8 71,6-80,2 72,0-80,6 72,4-81,0 72,8-81,4 73,2-81,8 73,6-82,2 -
Main fabric. For this model, we recommend using medium‑weight and thin rainwear and jacket fabrics; rainwear and jacket fabrics with or without a waterproof coating; rainwear and jacket fabrics with or without various types of impregnation; rainwear fabrics with a membrane coating. In terms of composition, these can be materials made of natural, synthetic or blended fibers.
Lining fabric. For the lining of membrane fabrics, we recommend using a lining made of synthetic fibers; for rainwear, jacket and other fabrics, use a lining made of synthetic, blended or natural fibers.
Interfacing materials. This garment uses a non‑fusible front edge reinforcement with a density of 90 g/m² and a width of 90 cm. -
The amount of fabric in meters.
Size 38 40 42 44 46 48 50 52 54 56 Main fabric, wide140 cm 2,45-2,50 2,50-2,70 2,55-2,75 2,60-2,85 2,60-2,85 2,70-2,95 2,80-3,00 2,85-3,00 2,90-3,15 2,95-3,20 Lining fabric, wide 140 cm 1,25-1,30 1,25-1,45 1,30-1,45 1,35-1,55 1,35-1,55 1,40-1,60 1,45-1,65 1,50-1,70 1,55-1,75 1,60-1,80 Non-fusible facing straightener of 90 g/m2 and with the width of 90 cm 0,80-0,85 0,85-0,90 0,85-0,90 0,85-0,95 0,85-0,95 0,85-0,95 0,85-0,95 0,90-0,95 0,90-1,00 0,90-1,00 A hat cord, width 3 mm(for casing of hood) 1,20 1,20 1,25 1,25 1,25 1,30 1,30 1,35 1,35 1,35 A hat cord, width 3 mm(for casing of hemline) 2,90-2,95 2,95-3,10 3,05-3,15 3,15-3,25 3,20-3,30 3,30-3,40 3,35-3,50 3,45-3,55 3,50-3,65 3,60-3,70
Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Accessories:
1. Snap fastener diameter 12.5‑15.0 mm - 11 pcs.
2. Eyelet diameter 4‑5 mm - 8 pcs.
3. Cord lock (stopper) with 2 holes - 4 pcs.
-
1. Multipurpose sewing machine;
2. An iron with or without steam;
3. Regular presser foot;
4. Wooden iron;
5. Ironing desk or console table;
6. Hand needle for basting;
7. Machine needles MICROTEX (extra sharp) №75-85 for the main fabric;
8. Machine needles №70 for the lining;
9. Paper scissors;
10. Scissors for textile cutting;
11. Snaps pressing machine to install accessories grommets and press studs, depending on the diameter.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.
