Jacket, Pattern №369

To set up printing of pattern on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Jacket pattern. Direct free silhouette jacket, lined, hip-length. Lowered shoulder line, shirtsleeve with elbow dart. Shoulder seam biased towards the front, on the back yoke and relief seams. There are chest patch pockets on the front. Blind fly with five buttons and loops. The length of ready-made garment to the average seam of the back in 44 size at growth 164-170 cm is 64,3 cm (gorge made more profound to 18 cm).

Fabric suggestion: Coat fabrics; dense, thick fabrics for suits; lining fabrics.

Fabric consumption:  Fabric width is 140-150 cm, the length is 2,0 m – 2,3 m for the top and 1,3 m – 1,5 m for lining. Fabric consumption is given in case of sewing or cutting mistake. Pattern pieces should be placed on the fold of a piece of fabric.                                                                                   

Pattern is given with seam allowances.

Degree of difficulty - “Advanced Beginner”

Sewing instruction is atteched to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns of top are located on a sheet measuring 60*222 cm. The patterns of lining are located on a sheet measuring 60*192 cm.

Presented a photo of jacket from Max Mara AW 2016/17 collection for visual demonstration of pattern №369.

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.