Jacket, pattern №516

To set up printing of pattern N516 on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Jacket pattern. Jacket on lining, small volume, straight, slightly narrowed to the bottom. The front and back with yokes and relief seams. There are pocket laps on the front. Double seam set-in-sleeve. The bottom of sleeve is with stitched cuff. Turn-down collar. The central clasp is on four buttons.

The length of ready-made garment by middle of the back without collar in 44 size at growth 164-170 cm is 43,2 cm (gorge made more profound to 0,5 cm). 

Stitch shaping by the chest is 8,0 cm (in total volume - 16,0 cm), stitch shaping by the waist is 11,5 cm (in total volume - 23 cm), stitch shaping by shoulder circumference is 9,0 cm.

Fabric suggestion: artificial or natural leather or suede, thick fabrics without stretching, denim fabrics; lining fabrics.

Fabric consumption: Fabric width is 140-150cm, the length of the top fabric is 1,30 m – 1,60 m; the length of lining is 1,10 m -1,40 m. Fabric consumption is given with margin in case of sewing or cutting mistake.

Pattern pieces should be placed on the fold of a piece of fabric всгиб.                                                                                  

Pattern is given with seam allowances.

Degree of difficulty - “Advanced Beginner”

Sewing instruction is atteched to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns of top are located on a sheet measuring 60*140 cm. The patterns of lining are located on a sheet measuring 60*114 cm.

Presented a photo of jacket from Рeuterey 2017 collection for visual demonstration of pattern №516.

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.