Jacket, pattern №684

Jacket pattern. It’s a summer straight silhouette lower-the-hips lined jacket. Front’s shoulder edges are slightly gathered. Front features plackets with 4 sewn buttonholes and 4 buttons. There are side patch pockets at the hip’s level, there is a patch pocket in a bust area of the left front part. Back comes with a center seam and a yoke. Hem edge of the garment is finished with a placket with 1 button closure. Set-in sleeves are long, each comes with 1 seam, hem edge of a sleeve is finished with a cuff with 1 button closure, a sleeve’s slit is finished with a sleeve placket. Armhole is lowered for 1, 5 cm from a shoulder point. Turn-down collar comes with a collar stand and 1 button closure. The garment features a detachable belt (there are belt loops stitched to the side seams in the waist area).

Eases added to a pattern, cm: 

Bust-line – 14,0 cm; Waist-line – 26,0 cm; Hips-line – 8,0 cm; Shoulders – 7,0 cm.

Garment Length Measurements, cm:

Finished back length along the center back seam, cm: size 38: 66,0-74,0, size 40: 66,2-74,2, size 42: 66,4-74,4, size 44: 66,6-74,6, size 46: 66,8-74,8, size 48: 67,0-75,0, size 50: 67,2-75,2, size 52: 67,4-75,4, size 54: 67,6-75,6, size 56: 67,8-75,8.

Finished sleeve length, cm: size 38: 52,8-60,4, size 40: 53,0-60,6, size 42: 53,2-60,8, size 44: 53,4-61,0, size 46: 53,6-61,2, size 48: 53,8-61,4, size 50: 54,0-61,6, size 52: 54,2-61,8, size 54: 54,4-62,0, size 56: 54,6-62,2.

Fabric suggestion: 

Main fabric. We recommend to use for this model faux suede with a knitted wrong side of average thickness and density. Use viscose or silk as a lining.

Interfacing materials. We recommend to use woven fusible interfacing for better quality sewing. Woven interfacing 32 gsm, 150 cm wide will suit for pieces reinforcement. Select the woven interfacing in accordance with the fabric thickness.

Amount of Fabrics (in metres):

Main fabric, wide 140 cm: sizes 38-42: 1,95-2,00, sizes 44-46: 1,95-2,10, sizes 48-50: 2,05-2,15, size 52: 2,05-2,20, sizes 54-56: 2,10-2,25.

Lining fabric, wide 140 cm: sizes 38-44: 1,35-1,50, size 46-56: 1,40-1,50.

Interfacing (density 32 g/m2; width 150 cm): sizes 38-56: 0,80.

Fusible on grain tape: sizes 38-42: 5,70, size 44-48: 5,80, size 50-56: 5,90.

Fusible reinforced bias tape: sizes 38-56: 1,00.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Garment accessories:

1. Buttons with the diameter of 18-20 mm – 8 pcs.

Pattern is given with seam allowances.   

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - ”Advanced”.

The photos shows a jacket sewed at the GRASSER  for pattern №684.

Model is wearing a size 42, height 164-170. Model parameters: Bust-line: 83 cm, Waist-line: 60 cm, Hips: 85 cm, Height: 167 cm.

The photo also shows: dress on pattern №672, trousres on pattern №686.

For sewing you will need the following equipment:  

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.