Kid’s raincoat, pattern №824

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Raincoat pattern.  It is a loose straight silhouette lower-the-knee raincoat without lining. Front has central fastening with snap buttons. There are set-in pockets with zippers on front details, topside pocket is vertical, downside one is horizontal. Back has horizontal yoke and central seam, there are slits in side seams. Shirt type sleeve with stitched cuff, sleeve strap and snap buttons to adjust size of the cuff, there are two bi-swing pleats at the seam that attaches cuff to a sleeve. The hood is stitched into the neckline together with the collar band. Hood is of average volume, it has cutoff central part, front edge of the hood has a hood facing detail with cord to adjust hood’s size. There are two installed grommets at each side of the hood to fix the cord and stoppers with two holes. 

Eases added to a pattern: Bust-line: 25 см, Waist-line: 25 см, Hips-line: 20 см, Shoulders: 25 см

Finished back length along the center back seam, см.: height 80 - 42,5см, height 86 - 46см, height 92 - 49,5см, height 98 - 53см, рheight 104 - 56,5см, height 110 - 60м, height 116 - 63,5см, height 122 - 76см, height 128 - 80см, height 134 - 84см, height 140 - 88см, height 146 - 92см, height 152 - 96см, height 158 - 100см, height 164 - 104см

Fabric suggestion: we recommend to use three-layer rain wear fabrics with membrane. Use thin rain wear or coat fabrics for additional lining details.

Main fabric, wide 140 cm: height 80: 1,05м, height 86: 1,10м, height 92: 1,15м, height 98: 1,25 м, height 104: 1,3 м, height 110: 1,35м, height 116: 1,45м, height 122: 1,85 м, height 128: 1,95 м, height 134: 2,05м, height 140: 2,15 м, height 146: 2,2 м, height 152: 2,3м, height 158: 2,4 м, height 164: 2,5 м.

Lining fabric, wide 140 cm: height 122-164: 0,4 м

Pattern is given with seam allowances.

Degree of difficulty - “Intermediate”

The photos shows a raincoat sewed at the GRASSER  for pattern № №824

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

For sewing you will need the following equipment:

• Multipurpose sewing machine;

• Non steam iron (additionally you may use a special iron to fuse seams);

• Regular presser foot;

• Wooden iron;

• Ironing desk or console table;

• Hand needle for basting;

• Machine needles Microtex №80;

• Paper scissors;

• Scissors for textile cutting;

• Eyelet press for installing eyelets and press studs, depending on the diameter

The pattern in your order will be in two print options:

1. For printing on A4. You need to print the pattern on a regular printer on A4 sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4 print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.