All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.
To set up printing of pattern N698 on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.
Trousers pattern. A loose fitting woman trousers “culottes”, extended downward, with the length up until the middle of the calf. The front part of the trousers has horizontal division that is slightly higher than the knee line. The culottes have patch pockets on the side with the curved line of the pocket entry, and the zipper fly at the front. The back parts have the cutt-off yoke and horizontal division that is slightly higher than the knee line (1 cm below compared to the front part division line). The back detail has patch pockets with the pocket welt with the buttonhole and the button. The upper edge of the trousers is finished with the attached waistband, which fastens with one buttonhole and the button. There are 5 loops on the waistband to support the belt. The waistline is at the natural waist position. The front parts of the trousers have polyteny (rivets) installed at the top corners of the pocket.
General increases, laid in the pattern: Waist: 4,5 см., Hips: 2,5 см.
Fabric suggestion: For this particular garment we recommend to use jeans fabric of the medium thickness and density without stretching or with slight stretching: “denim”, “broken twill”, “ecru”. It can be the cotton, as well as fabrics made of the artificial, synthetic or mixed fibers. The cotton fabric for bias tapes: calico, fabrics such as for shirts or dress.
Main fabric, wide 140см: 38 size: 1,40-1,55 м., 40,42,44 size: 1,45-1,60 м., 46,48 size: 1,55-1,70 м., 50 size: 1,60-1,75 м., 52 size: 1,65-1,75 м.
Pattern is given with seam allowances.
Degree of difficulty - "Middle"
The photo shows a trousers sewed at the GRASSER bureau for pattern №698
We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS!
Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.
For sewing you will need the following equipment:
Standard sewing machine;
3 thread overlock machine;
An iron with or without steam;
Regular presser foot;
One-legged (or zipper) foot;
Hand needle for basting;
Machine needles for jeans/denim – 130/170H-J №80-90;
Snaps pressing machine to install accessories and polyteny dies and the metal buttons dies depending on diameter.
The pattern in your order is in two print options:
1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!
2. For printing on a large-scale plotter. The patterns size 52 are located on sheet measuring 60*227 см.
Women's jersey jacket, pattern №966
Jacket, pattern №451
Dress, pattern №663
Top, pattern №491
Jacket, pattern №912
Men's hoodie, pattern №49
Sweatshirt, pattern №146
All documents, multimedia and texts posted on en-grasser.com are works of authorship and are the property of Grasser Group Limited. All the information and products are provided to buyers for personal use. Resale of patterns and master classes is prohibited and prosecuted by law. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law. When copying text information, an active link to en-grasser.com is required. Every copy from the site en-grasser.com is tracked.