Trousers, pattern №453

To set up printing of pattern N453 on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Trousers pattern. Trousers for women straight silhouette, free volume, with slanted side pockets. The front parts have a model extension along the entire length due to a deep one-sided fold. The fold extends into the seam of the cut of the undercut belt. On the front there are half-belts with buckles in the cut and side seam of the belt. On the back parts there are pockets refilet with two facings. The waist cut at the back is with a curly line, in darts above the pockets there are half-belts. The beveled front wrap-clasp is fixed to the half-belts with buckles and hidden button. The waist cut of trousers is processed by facing. The waistline by the garment is lowered on 3 cm from the base waistline, the seat seam is lowered on 2.5 cm.

The length of ready-made trousers to the center of the front part in 44 size at growth 164-170 cm is 107cm. 

Total stitch shaping:  by the waist is 3,0 cm, by hips is 1,6 cm + additional model widening of front parts.

Fabric suggestion: Thin and dense flexible fabrics without stretching.

Fabric consumption: Fabric width is 1,4m: fabric consumption is 2.3 m – 2, 7 m, pattern pieces should be place on the fold of a piece of fabric.

Pattern is given with seam allowances.

Level of difficulty - “Advanced Beginner”

Sewing instruction is attached to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order is in two print version:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns are located on a sheet measuring 60*276 cm.

Presented a photo of trousers from Zimmermann, SS 2017 collection for visual demonstration of pattern №453

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.