Top, pattern №1216
Bandeau top with straps and snap button fastening at the back.
Suits for beginners
Instructions with photo
Plotter 900 + А4/Letter
Sizes:
-
size 38, height 152-182
-
size 40, height 152-182
-
size 42, height 152-182
-
size 44, height 152-182
-
size 46, height 152-182
-
size 48, height 152-182
-
size 50, height 152-182
-
size 52, height 152-182
-
-
Size:
- 38
- 40
- 42
- 44
- 46
- 48
- 50
- 52
Height:
- 152-182
$9
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
A slim-fit, fully lined top with shoulder straps. The length of the garment is cropped, above the waistline. The front is constructed with horizontal, shaped seams, vertical princess seams, and a center seam. The back features vertical princess seams. The upper edge of the front is shaped with a curved line, while the back has a straight line positioned below the shoulder blade level. The top fastens with snap buttons on the back.
Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 84 cm, Waist-line: 63 cm, Hips: 93 cm, Height: 174 cm.
-
Bust-line: minus 1,5 cm (in the sizes 38-48);
minus 0,5 cm (in the sizes 50-52).
-
Size 38 40 42 44 46 48 50 52 Finished back lenght along the center back, cm 10,0
-
Main Fabric. We recommend using shirting, blouse-dress, thin to medium-weight suiting fabrics for this model, with no or minimal stretch, made from natural, synthetic, or blended fibers. Suitable options include a variety of cotton, linen, and denim fabrics with diverse textures and weights. The primary fabric recommendation is that it should be structured and have low spreading at the seams.
Lining material. As a lining use the fabrics with density and plasticity suitable for the shell fabric, made out of natural, synthetic or blended fibers.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 33-39 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.
-
The amount of fabric in meters.
Size 38 40 42 44 46 48 50 52 Main fabric, wide 140 cm 0,45 0,50 Lining fabric, wide 140 cm 0,15 0,20 0,25 Interfacing (density 33-39 g/m2, width 150 cm) 0,20 0,25 Snap button tape ARTA-F 0,15
Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once. -
- Multipurpose sewing machine;
- An iron with or without steam;
- Regular presser foot;
- Hinged cording foot;
- Wooden iron;
- Ironing desk or console table;
- Hand needle for basting;
- Machine needles №70-80 for the main fabric;
- Machine needles №70-80 for the lining;
- Paper scissors;
- Scissors for textile cutting.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.
All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.
