Boxer shorts, pattern №579

To set up printing of pattern on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.

Men's boxer shorts pattern. Boxer shorts, short, without side seams, with gusset. Belt is of elastic tape. The length of the ready-made garment by the middle of the back without gusset and elastic tape of the shorts in 50 size is 24.0 cm (the waist on the back is understated by 9.5 cm).

Fabric suggestion: medium-stretch knitted fabrics (100% cotton fabric or cotton with a minimum number of manufactured fibers).

Fabric consumption: fabric width is 140-150cm, the length is 0,4 m - 0,5 m. Fabric consumption is given with margin in case of sewing or cutting mistake.

Pattern pieces should be place on the fold of a piece of fabric.

Pattern is given with seam allowances.

Level of difficulty - “Beginner”

Sewing instruction is attached to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).

The pattern in your order will be in two print version:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns are located on a sheet measuring 60 * 222 cm.

To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.