Duster coat, pattern №1126

Sizes:

size 38, height 152-158
size 38, height 158-164
size 38, height 164-170
size 40, height 152-158
size 40, height 158-164
size 40, height 164-170
size 40, height 170-176
size 40, height 176-182
size 42, height 152-158
size 42, height 158-164
size 42, height 164-170
size 42, height 170-176
size 42, height 176-182
size 44, height 152-158
size 44, height 158-164
size 44, height 164-170
size 44, height 170-176
size 44, height 176-182
size 46, height 152-158
size 46, height 158-164
size 46, height 164-170
size 46, height 170-176
size 46, height 176-182
size 48, height 152-158
size 48, height 158-164
size 48, height 164-170
size 48, height 170-176
size 48, height 176-182
size 50, height 152-158
size 50, height 158-164
size 50, height 164-170
size 50, height 170-176
size 50, height 176-182
size 52, height 152-158
size 52, height 158-164
size 52, height 164-170
size 52, height 170-176
size 52, height 176-182
size 54, height 152-158
size 54, height 158-164
size 54, height 164-170
size 54, height 170-176
size 54, height 176-182
size 56, height 152-158
size 56, height 158-164
size 56, height 164-170
size 56, height 170-176
size 56, height 176-182
-

Size:

Height:

152-158
158-164
164-170
170-176
176-182

$10

After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".

Info

Comments

Questions

Duster coat pattern. Pattern of a duster coat. Unlined duster coat with loose fit and slightly flared hem. The length is above ankle. Double breasted front closure with two rows of loops and buttons. The front with jetted pockets. The pockets are with welts and flaps, with stitched ends. The left front features a storm flap. The back is designed with a centre seam and a storm flap. A kick pleat is added in the centre seam at the hip line. The pleat is sewn with a wedge-like section of fabric. Raglan sleeves with three seams: upper seam, front seam and elbow seam. Roll collar with an attached collar stand. The collar stand has a hook and eye closure. The coat is completed with a detachable belt. The belt is inserted through two belt loops, attached to the side seams.

Eases added to a pattern, cm:

Measuring sector/Size	38	40	42	44	46	48	50	52	54	56
Bust-line	43,5 сm
Hips-line	41,7-42,3	41,7-42,3	41,7-42,3	41,7-42,3	41,7-42,3	41,7-42,3	41,4-42,6	41,4-42,6	41,4-42,6	41,4-42,6
Shoulders	27,4 сm

Garment Length Measurements, cm:

Size	38	40	42	44	46	48	50	52	54	56
Finished back length along the center back seam	123,1-129,5	121,3-137,7	121,4-137,8	121,4-137,8	121,5-137,9	121,5-137,9	126,1-138,0	121,6-138,0	121,7-138,1	121,7-138,1
Finished sleeve length from the neckline	67,3-71,8	67,7-76,6	68,1-77,1	68,5-77,4	68,9-77,9	69,3-78,2	69,8-78,7	70,2-79,1	70,7-79,6	71,0-79,9

Fabric suggestion:

Main fabric. We recommend using soft, pliable, draping, dress and blouse fabrics for this model, without stretching, medium density, and made of natural, synthetic or mixed fibers. For example, natural silk, artificial silk or fabrics with similar properties.

Lining material. As a material for making a bias binding for processing the edges, we recommend a thin lining, dress and blouse fabrics made of natural, synthetic, or mixed fibers.

Interfacing materials. For better quality of sewing, we recommend to use the interfacing material and fusible facing straightener. For example, you may use 18 g/m2 and 33-39 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.

Amount of Fabrics (in metres):

Size	38	40	42	44	46	48	50	52	54	56
Main fabric, wide 140 cm	3,70-3,90	3,75-4,20	3,85-4,25	3,90-4,35	4,05-4,45	4,10-4,45	4,15-4,65	4,25-4,70	4,30-4,80	4,35-4,85

Size	38	40	42	44	46	48	50	52	54	56
Interfacing (density 18 g/m2; width 150 cm)	1,40	1,40-1,55	1,40-1,55	1,40-1,55	1,40-1,55	1,40-1,55	1,40-1,55	1,40-1,55	1,40-1,55	1,40-1,55

Size	38	40	42	44	46	48	50	52	54	56
Interfacing (density 33-39 g/m2; width 150 cm)	1,70	1,75	1,75	1,80	1,85	1,90	1,90	1,95	2,00	2,05

Size	38	40	42	44	46	48	50	52	54	56
Bias fusible tape with reinforcement stitches	0,10	0,10	0,10	0,10	0,10	0,10	0,10	0,10	0,10	0,10

Size	38	40	42	44	46	48	50	52	54	56
Fusible on grain tape	5,65-5,85	5,70-6,40	5,75-6,15	5,85-6,20	5,90-6,30	5,95-6,35	6,00-6,40	6,10-6,50	6,20-6,55	6,25-6,60

Size	38	40	42	44	46	48	50	52	54	56
Lining fabric, wide 140 cm (for bias tape - Option 1)	0,60-0,65	0,60-0,70	0,60-0,70	0,60-0,70	0,60-0,70	0,60-0,70	0,60-0,70	0,60-0,70	0,60-0,70	0,60-0,75

Size	38	40	42	44	46	48	50	52	54	56
Fininshed bias tape, wide 15 mm (Option 2)	11,90-12,45	12,00-13,10	12,0-13,15	12,10-13,25	12,15-13,30	12,20-13,40	12,30-13,45	12,35-13,55	12,45-13,60	12,50-13,65

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Accessories:

1. Buttons with the diameter of 18-22 mm - 13 pcs.
2. Button (under button) with a diameter of 10-15 mm - 5 pcs.

Pattern is given with seam allowances.

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - «Advanced».

The photos shows a duster coat sewed at the GRASSER for pattern №1126.

Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 81 cm, Waist-line: 61 cm, Hips: 92 cm, Height: 174 cm.

The photo also shows: dress on pattern №1133, shirt on pattern №947, shorts on pattern №1044, dress on pattern №1131.

For sewing you will need the following equipment:

1. Multipurpose sewing machine;
2. An iron with or without steam;
3. Regular presser foot;
4. Wooden iron;
5. Ironing desk or console table;
6. Hand needle for basting;
7. Machine needles №70-80;
8. Paper scissors;
9. Scissors for textile cutting;
10. Bias tape maker.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter.

A test square for checking the plotter scale is located on the pattern sheet.

All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.