Jacket, pattern №1226
Sizes:
-
size 38, height 152-158
-
size 38, height 158-164
-
size 38, height 164-170
-
size 40, height 152-158
-
size 40, height 158-164
-
size 40, height 164-170
-
size 40, height 170-176
-
size 40, height 176-182
-
size 42, height 152-158
-
size 42, height 158-164
-
size 42, height 164-170
-
size 42, height 170-176
-
size 42, height 176-182
-
size 44, height 152-158
-
size 44, height 158-164
-
size 44, height 164-170
-
size 44, height 170-176
-
size 44, height 176-182
-
size 46, height 152-158
-
size 46, height 158-164
-
size 46, height 164-170
-
size 46, height 170-176
-
size 46, height 176-182
-
size 48, height 152-158
-
size 48, height 158-164
-
size 48, height 164-170
-
size 48, height 170-176
-
size 48, height 176-182
-
size 50, height 152-158
-
size 50, height 158-164
-
size 50, height 164-170
-
size 50, height 170-176
-
size 50, height 176-182
-
size 52, height 152-158
-
size 52, height 158-164
-
size 52, height 164-170
-
size 52, height 170-176
-
size 52, height 176-182
-
size 54, height 152-158
-
size 54, height 158-164
-
size 54, height 164-170
-
size 54, height 170-176
-
size 54, height 176-182
-
size 56, height 152-158
-
size 56, height 158-164
-
size 56, height 164-170
-
size 56, height 170-176
-
size 56, height 176-182
-
-
Size:
- 38
- 40
- 42
- 44
- 46
- 48
- 50
- 52
- 54
- 56
Height:
- 152-158
- 158-164
- 164-170
- 170-176
- 176-182
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
A lined small volume jacket with a semi-fitting silhouette and with a length to the hip line. The central side closure has 5 button loops and 5 buttons. The garment is cut-off along the waistline. The upside part of the front has princess seams from the armhole. The downside part of the front has welt pockets with the flap and the facing. The upside part of the back has a center seam, armhole princess seams and shoulder darts. The sleeve is sew-in, long, double-seam, with an open slit in the elbow seam. The neckline of the garment is rounded, and finished with a stand-up collar with a cut-off stand.
Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 84 cm, Waist-line: 63 cm, Hips: 93 cm, Height: 174 cm. -
Bust-line: 9,0 cm;
Waist-line: 12,0 cm (for all height in the sizes 38-50); 14,0 cm (for all height in the sizes 52-56);
Hips-line: 18,0 cm;
Shoulders: 8,5 cm. -
Size 38 40 42 44 46 48 50 52 54 56 Finished back along the center back, cm 55,1-58,3 55,2-61,6 55,3-61,7 55,4-61,8 55,5-61,9 55,6-62,0 55,7-62,1 55,8-62,2 55,9-62,3 56,0-62,4 Finished sleeve length, cm 57,6-61,3 57,9-65,3 58,2-65,5 58,5-65,9 58,8-66,2 59,1-66,5 59,4-66,8 59,7-67,1 60,0-67,4 60,3-67,7
-
Main fabric. For this model, we recommend using suit fabrics that can be wet-heat treated (in some areas of the garment, the shrinkage of the garment and edges are embedded). In terms of composition, these can be fabrics made of natural, synthetic or mixed fibers.
-
The amount of fabric in meters,
Size 38 40 42 44 46 48 50 52 54 56 Main fabric, wide 140 cm 1,35-1,40 1,35-1,45 1,40-1,50 1,45-1,55 1,50-1,60 1,50-1,60 1,55-1,65 1,60-1,70 1,65-1,75 1,65-1,80 Lining material, wide 180 cm 1,10-1,20 1,15-1,25 1,15-1,30 1,15-1,30 1,20-1,35 1,20-1,35 1,20-1,35 1,20-1,35 1,25-1,35 1,25-1,35 Interfacing (density 39 g/m2, width 150 cm) 1,00-1,05 1,00-1,10 1,05-1,10 1,05-1,15 1,10-1,15 1,10-1,15 1,10-1,20 1,15-1,25 1,15-1,25 1,20-1,25 Interfacing (density 55 g/m2, width 150 cm) 0,50 0,55 0,60 0,65 Bias fusible tape with reinforcement stitches 2,50-2,55 2,55-2,65 2,60-2,70 2,65-2,75 2,70-2,80 2,75-2,85 2,80-2,90 2,85-2,95 2,90-3,00 2,95-3,05 Fusible on grain tape
1,35-1,40 1,35-1,45 1,35-1,45 1,40-1,50 1,40-1,50 1,40-1,50 1,45-1,55 1,45-1,55 1,45-1,55 1,50-1,60
Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Accessories:
1. Buttons with the diameter of 18-22 mm – 5 pcs. for central closure.
2. Buttons with the diameter of 12-15 mm – 8 pcs. for sleeve slit.
3. Attachable sleeve cap pad with the width of 10 mm - 1 pair.
4. Sleeve head – 1 pair.
-
- Multipurpose sewing machine;
- 4 thread overlock machine;
- A coverstitch machine (if desired);
- An iron with or without steam;
- Regular presser foot;
- Wooden iron;
- Ironing desk or console table;
- Hand needle for basting;
- Machine needles Stretch №70-80 or Super Stretch №70-80;
- Paper scissors;
- Scissors for textile cutting.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.
All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.