Jacket, pattern №905

Use the Test Square to adjust the print scale! A test square for checking the A4 scale is located on the first sheet of the A4 pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Jacket pattern. Regular fit, straight lined jacket with the length below hip line. The shoulders are wide. The side seam is not provided, it was transferred into a side piece. The front pieces have darts. One pair of darts starts from the front neckline, they are covered by the lapel. The other pair of darts is formed by joining together the bust darts and the waist darts. The right front piece features two jetted pockets with flaps, which are placed one above the other. The front dart finishes at the lower pocket opening cut. On the left front piece the dart is transferred into the hem and finishes with a split. A belt with a buttonhole in the end is inserted into a princess seam at the waistline level. The front off-centre closure has one buttonhole and one button. The back has a centre seam. A vent is designed in the centre seam. The sleeves are set-in, long, with two seams and a vent in the elbow seam. The sleeve vent closes with four sewn buttonholes and four buttons. The notched lapel collar has a sewn stand.

Eases added to a pattern, cm:  Bust-line: 15,4 сm; Hips-line: 14,8 cm; Shoulders: 6,5 cm.

Finished length along the center back seam, см: 38 size: 74,6-78,8; 40 size: 47,6-83,0; 42 size: 74,7-83,1; 44 size: 74,7-83,1; 46 size: 74,8-83,2; 48 size: 74,8-83,2; 50 size: 74,9-83,3; 52 size: 74,9-83,3; 54 size: 75,0-83,4; 56 size: 75,0-83,4.

Fabric suggestion: we recommend suiting fabrics which are easy to press, as well as thin coating fabrics made of natural fibre, synthetic fibre or blended. Lining: use the fabrics with density and plasticity suitable for the shell fabric, made out of natural, synthetic or blended fibre.

Main fabric, wide 140 cm: 38 size: 1,70-1,80 м; 40 size: 1,75-1,90 м; 42 size: 1,80-1,95 м; 44 size: 1,85-2,00 м; 46 size: 1,90-2,05 м; 48 size: 1,95-2,15 м; 50 size: 2,00-2,20 м; 52 size: 2,05-2,25 м; 54 size: 2,10-2,30 м; 56 size: 2,15-2,35 м.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Pattern is given with seam allowances.

Degree of difficulty - "Advanced”

The photos shows a jacket sewed at the GRASSER  for pattern №905

Model is wearing a size 42, height 170-176. Model parameters: Bust-line: 84 см, waist-line: 62 см, Hips: 94 см, height 176 см

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
  
• An iron with or without steam;
• Regular presser foot;
• Hinged cording foot;
• Wooden iron;
• Sleeve board;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles №75-80 for the main fabric;
• Machine needles №70 for the lining;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.