Jacket, pattern №912

Use the Test Square to adjust the print scale! A test square for checking the A4/Letter scale is located on the first sheet of the A4/Letter pattern file. The test square for checking the plotter scale is located on the pattern sheet in the plotter file.

Jacket pattern. It’s slim fit hip length lined jacket. Jacket features a center front zipper closure. Front comes with a side part, stitched to it, and a breast pocket. Set-in zipper pocket is placed on the left center front detail. Back features side parts, shoulder darts and center back seam with a vent at its bottom. Jacket features set-in two-piece lengthened sleeve, sleeve’s hem edge is finished with a cuff from knitted fabric. Sleeve’s length is enlarged for 12 cm lower than a wrist. English collar comes with a collar stand.

Eases added to a pattern, cm:  Bust-line: 7,4 сm; Waist-line: 18,8 (for all height in the sizes 38-48) cm, 20,8 (for all height in the sizes 50-56); Hips-line: 12,2 cm; Shoulders: 5,6 cm.

Finished length along the center back seam, см: 38 size: 58,7-65,0; 40-56 size: 58,7-67,0.

Fabric suggestion: we recommend to use for this garment suiting fabrics that can be shaped well by wet-heat pressing. Also you can use thin coating fabrics from natural, synthetic or semi-synthetic fibers. For cuffs use knitted fabrics of average thickness or thick with 0,80-0,85 stretching ratio. Fabric can be from natural fibers (wool, cotton, silk), semi-synthetic (viscose, modal), synthetic or blended fibers. As lining use those materials that have same properties as main fabric has (pliability, thickness), fibers can be natural, synthetic or blended.

Main fabric, wide 140 cm: 38 size: 1,30-1,40 м; 40 size: 1,30-1,45 м; 42,44 size: 1,35-1,50 м; 46 size: 1,35-1,55 м; 48 size: 1,40-1,60; 50 size: 1,45-1,60 м; 52 size: 1,50-1,65 м; 54 size: 1,45-1,60 м; 56 size: 1,55-1,70 м.

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Pattern is given with seam allowances.

Degree of difficulty - "Advanced”

The photos shows a jacket sewed at the GRASSER  for pattern №912

Model is wearing a size 44, height 176-182. Model parameters: Bust-line: 88 см, waist-line: 63,5 см, Hips: 90 см, height 179 см

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

• Multipurpose sewing machine;
• An iron with or without steam;
• Regular presser foot;
• Hinged cording foot;
• Wooden iron;
• Sleeve board;
• Ironing desk or console table;
• Hand needle for basting;
• Machine needles №80-90 for the main fabric;
• Machine needles №70-75 for the lining;
• Paper scissors;
• Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. 

A test square for checking the plotter scale is located on the pattern sheet.