Men's hoodie and sweatshirt, pattern №811

To adjust the print scale, use the Test square! The test square for checking the A4 scale is located on the first sheet in the A4 pattern file. The test square for checking the print scale on the plotter is located on the sheet with the details of the pattern in the file for the plotter.

Men's hoodie/sweatshirt pattern. Hip length, medium volume hoodie/sweatshirt cut in a straight silhouette. The front features shaped details (seams) that run from the armhole down to the garment hem line (these seams are also shifted in relation to the prominent point of the breast area).The pockets are located in the shaped seams (kangaroo pocket type). Front bust dart are manipulated in the shaped seams and armscyes (variation of princess seam). Raglan sleeve without an upper seam. Shoulder area has a cut out piece. Sleeve hems are finished with sewn on cuffs. Garment’s hem is finished with a sewn on belt. The cuffs and waistband are made out of rib-knit fabric. 

This pattern features two ways of finishing the neckline: 

Details of the hood are located separately, in an additional file, a link to an additional file will be in your order.

Eases added to a pattern: Chest-line: 16;  Hips: 9; Shoulders: 15.

Finished back length along the center back, см: 44 size: 63,6-68,1, 46 size: 63,8-68,3, 48 size: 64,0-68,6, 50 size: 64,2-69,0, 52 size: 64,4-69,3, 54 size: 64,8-69,9,  56 size: 65,4-70,5, 58 size:65,9-71,0, 60 size: 66,5-71,6, 62 size: 67,7-72,8.

Fabric suggestion: we recommend to use french terry knit jersey, sweatshirt fleece jersey. For the cuffs and waistband we recommend to use cotton ribbed knit. For the pocket upper lining, use single knitted jersey like tricot. The fabric content can be cotton or cotton combined with other fibers. 

Material consumption for a sweatshirt with a collar:

Main garment fabric 140cm wide: 44-50 size: 1,55-1,65м,  52-62 size: 1,90-2,00 м.

Main garment fabric 180cm wide: 44-50 size: 1,25-1,30м,  52-62 size: 1,35-1,45 м.

Rib-knit fabric, piece of 120 cm wide: 44-62 size:  0,35м

Material consumption for a hoody with a hood:

Main garment fabric 140cm wide: 44-50 size: 1,70-1,80м,  52-62 size: 1,90-2,00 м.

Main garment fabric 180cm wide: 44-50 size: 1,35-1,40м,  52-62 size: 1,55-1,65 м.

Lining fabric, wide 170 cm (kulirka): 44-62 size: 0.6м

Rib-knit fabric, piece of 120 cm wide: 44-62 size: 0,35 м

Pattern is given with seam allowances.

Degree of difficulty - “Intermediate”

The photo shows a sweatshirt sewed at the GRASSER bureau for pattern №811

The sweatshirt is sewn on a pattern of 52 sizes, height 164-170. Model parameters: Bust-line: 83cm, waist-line: 62cm, Hips: 87cm, height 167

The images also show: trousers on pattern №191

We want the work with the Grasser patterns to bring you pleasure, and the sewing process to be understandable, so a file with a very detailed sewing instruction is attached to the pattern. It covers all stages of the work on the garment, with step-by-step SEWING PHOTOS! 

Also there are detailed information of the necessary consumption of fabric, materials and accessories in the instruction.

For sewing you will need the following equipment:

• 4 thread overlock;

• Multipurpose sewing machine;

• Regular presser foot;

• Steam iron;

• Ironing desk or console table;

• Wooden iron;

• Hand needle for basting;

• Machine needles Stretch № 80;

• Paper scissors;

• Scissors for textile cutting.

• Press to install the eyelets, depending on the diameter.

The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a  large-scale plotter. The patterns size 62 are located on sheet measuring 60x228 см. Details of hood size 62 are located on a sheet of size 60 x 92 cm

The test square for checking the print scale on the plotter is located on the sheet with the details of the pattern.