Sweatshirt, pattern №52

Sweatshirt pattern. Sweatshirt with a close-fitting silhouette and a low volume, length to the hip line. Raglan sleeves with upper darts, its length is below wrist. The bottom edge of the sleeve is finished with a 6 cm stitch-on cuff. The neckline of the garment is round, finished with a facing of 2 cm. The bottom of the garment is finished with a 6 cm elastic stitch-on waistband/hem.

Eases added to a pattern, cm: Bust-line: 6,5, Waist-line: 16,7 (for all height in the sizes 44-56), 17,7 (for all height in the sizes 58-62), Hips-line: 44 size height 170-176: -3,4, 44 size height 176-182: -4,2, 44 size height 182-188: -5,0, 44 size height 188-194: -5,8, 46 size  рост 170-176: -2,4, 46 size рост 176-182: -3,2, 46 size рост 182-188: -4,0, 46 size рост 188-194: -4,8, 48 size height 170-176: -1,4, 48 size height 176-182: -2,2, 48 size  height 182-188: -3,0, 48 size height 188-194: -3,8, 50 size height 170-176: -0,4, 50 size рост 176-182: -1,2, 50 size рост 182-188: -2,0, 50 size рост 188-194: -2,8, 52 size рост 170-176: 0,6, 52 size height 176-182: -0,2, 52 size height 182-188: -1,0, 52 size height 188-194: -1,8, 54 size height 170-176: 1,6, 54 size height 176-182: 0,8, 54 size height 182-188: 0, 54 size height 188-194: -0,8, 56 size height 170-176: 2,6, 56 size height 176-182: 1,8, 56 size height 182-188: 1,0, 56 size height 188-194: 0,2, 58 size height 170-176: 5,6, 58 size height 176-182: 4,8, 58 size height 182-188: 4,0, 58 size height 188-194: 3,2, 60 size height 170-176: 6,6, 60 size height 176-182: 5,8, 60 size height 182-188: 5,0, 60 size height 188-194: 4,2, 62 size height 170-176: 7,6, 62 size height 176-182: 6,8, 62 size height 182-188: 6,0, 62 size height 188-194: 5,2.

Finished back length along the center back seam from neck binding to waistband, сm: 44 size: 59,2-65,2, 46 size: 59,4-65,4, 48 size: 59,6-65,5, 50 size: 59,8-65,8, 52 size: 60,0-66,0, 54 size: 60,2-66,2, 56 size: 60,4-66,4, 58 size: 60,6-66,6, 60 size: 60,8-66,8, 62 size: 61,0-67,0.   .

Finished sleeve length from neck binding to cuff, сm: 44 size: 73,1-79,5, 46 size: 73,7-80,0, 48 size: 74,2-80,5, 50 size: 74,7-81,0, 52 size: 75,2-81,5, 54 size: 75,7-82,0, 56 size: 76,2-82,5, 58 size: 76,7-83,0, 60 size: 77,2-83,5, 62 size: 77,7-84,0. 

Fabric suggestion: We recommend using a 2 or 3-thread knit, fleece-lined or unlined. The fibre can be cotton or, alternatively, a mix of cotton and other fibres. For hemline, cuffs and waistband/hem we recommend using medium-stretch knits with a stretch factor of 0.80 - 0.85, medium-density or heavy-density tubular knits.

Amount of main fabric, wide 140 cm: 44-48 size: 1,30-1,45 м, 50 size: 1,40-1,55 м, 52 size: 1,45-1,55 м, 54-58 size: 1,50-1,60 м, 60 size: 1,55-1,65 м, 62 size: 1,55-1,70 м.

Amount of main fabric, wide 180 cm: 44 size: 0,90-1,00 м, 46 size: 1,00-1,10 м, 48 size: 1,10-1,20 м, 50 size: 1,20-1,30 м, 52 size: 1,25-1,40 м, 54-56 size: 1,30-1,40 м, 58 size: 1,35-1,45 м, 60 size: 1,35-1,50 м, 62 size: 1,40-1,50 м.

Amount of ribbed knit, wide 100- 110 сm: 44-54 size: 0,35 м; 56-62 size: 0,40 м.

Amount of twill tape, 1 cm wide: 44-48 size: 0,25 м; 50-62 size: 0,30 м.

Degree of difficulty – «Beginner»

The photos shows a sweatshirt sewed at the GRASSER  for pattern №52

Model is wearing a size 52, height 182-188. Model parameters: Bust-line: 104 см, waist-line: 80 см, Hips: 97 см.

The photo also shows: trousers on pattern №950, baseball cap on pattern №949 

For sewing you will need the following equipment: 

Multipurpose sewing machine; 4 thread overlock machine; An iron with or without steam; Regular presser foot; Wooden iron; Ironing desk or console table; Hand needle for basting; Machine needles Stretch or Super Stretch №80; Paper scissors; Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.