All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.
Trousers pattern. Tapered-fit ankle-length men’s trousers. The front features angled pockets with side yokes. A patch pocket with side folds is attached between the hip line and the knee. The waistband is straight and attached to the garment. It is divided into 3 sections with topstitched parallel lines. The waistband is elasticised with internal drawcord for better fitting around the waist. The hem is finished with an attached cuff 6.0 cm wide. The waist is lowered by 6.0 cm. The crotch is lowered by 5.0 cm.
Eases added to a pattern, cm:
Waist-line – 21,0 cm (for all height in the sizes 42-50);
– 22,0 cm (for all height in the sizes 52-62).
Hips-line – 10,5 cm (for all height in the sizes 42-50);
– 11,5 cm (for all height in the sizes 52-62).
Finished length along the side seam (without waistband and cuff)
Finished garment hem width
Fabric suggestion: Main fabric. For this garment we recommend using midweight and heavy-weight knitted fabrics with a little stretch. For example, 2-thread or 3-thread sweatshirting knit or 2-thread or 3-thread terry knit. It may be made of natural fibre (wool, cotton or silk), artificial (viscose or modal), synthetic or blended fibre.
Lining material. For the upper pocket lining we recommend using single jersey or other knitted fabrics with density and plasticity suitable for the shell fabric, made out of natural, synthetic or blended fibre.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 18 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.
Amount of Fabrics (in metres):
Main fabric, wide 140 cm
Main fabric, wide 180 cm
Lining fabric, wide 140/180 cm
Interfacing (density 18 g/m2; width 150 cm)
Elastic band, 4 cm wide (including seam allowances)
Flat cord, 0.5 or 1.5 cm wide
Fusible on grain tape
Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
1. Cord locks (if desired) - 2 pieces.
Pattern is given with seam allowances.
Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.
Degree of difficulty - "Beginner".
The photos shows a trousers sewed at the GRASSER for pattern №1059.
Model is wearing a size 48, height 188-194. Model parameters: Bust-line: 103 cm, Waist-line: 82 cm, Hips: 102 cm, Height: 188 cm.
1. Multipurpose sewing machine;
2. 4 thread overlock machine;
3. An iron with or without steam;
4. Regular presser foot;
5. Wooden iron;
6. Ironing desk or console table;
7. Hand needle for basting;
8. Machine needles Stretch or Super Stretch №70-80;
9. Paper scissors;
10. Scissors for textile cutting.
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!
A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter.
A test square for checking the plotter scale is located on the pattern sheet.
Sew with this goods
Sweatshirt, pattern №953
T-shirt, pattern №955
Jacket, pattern №1013
Men's shirt, pattern №1033
Cape coat, pattern № 520
Blouse, pattern №753
Trench coat, pattern №155
Top with a gathered center, pattern №983
Dress, pattern №423
Blouse, pattern №419
Jacket, pattern №839
Skirt, pattern №1075
Insulated coat, pattern №882
All documents, multimedia and texts posted on en-grasser.com are works of authorship and are the property of Grasser Group Limited. All the information and products are provided to buyers for personal use. Resale of patterns and master classes is prohibited and prosecuted by law. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law. When copying text information, an active link to en-grasser.com is required. Every copy from the site en-grasser.com is tracked.