Blouse, pattern №314

Sizes:

  • size 38
  • size 40
  • size 42
  • size 44
  • size 46
  • size 48
  • size 50
  • size 52
  • size 54
  • -

Size:

  • 38
  • 40
  • 42
  • 44
  • 46
  • 48
  • 50
  • 52
  • 54
$3

After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".

Info

Comments

Questions


To set up printing of pattern N314 on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file.


Blouse pattern. Shift Blouse with band collar below the hip length. The front side of the blouse with button opening placket and box pleat coming out from button opening and with figured double shoulder yoke. Long cuffed sleeves with two pleats at the bottom. The bottom hem is figured: front length is shorter than back side. 

The final garment side length in size 44 is 77 cm.

Fabric suggestion: Lightweight stretching or slightly-stretching drapey fabrics.

Fabric consumption:  width is 140-150 cm, the top length of fabric is 1.70 m. - 1.90 m.. Fabric consumption given with margin in case of sewing or cutting mistake. 

Pattern is given with seam allowances.

Degree of difficulty - “Advanced Beginner”


Sewing instruction is attached to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories).


The pattern in your order is in two print options:

1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew!

2. For printing on a large-scale plotter. The patterns are located on a sheet measuring 60 * 174 cm.


Presented a photo of dress from Ralph Lauren SS 2016 collection for visual demonstration of pattern 314


To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.