Coat, pattern №1159

Sizes:

size 38, height 152-158
size 38, height 158-164
size 38, height 164-170
size 40, height 152-158
size 40, height 158-164
size 40, height 164-170
size 40, height 170-176
size 40, height 176-182
size 42, height 152-158
size 42, height 158-164
size 42, height 164-170
size 42, height 170-176
size 42, height 176-182
size 44, height 152-158
size 44, height 158-164
size 44, height 164-170
size 44, height 170-176
size 44, height 176-182
size 46, height 152-158
size 46, height 158-164
size 46, height 164-170
size 46, height 170-176
size 46, height 176-182
size 48, height 152-158
size 48, height 158-164
size 48, height 164-170
size 48, height 170-176
size 48, height 176-182
size 50, height 152-158
size 50, height 158-164
size 50, height 164-170
size 50, height 170-176
size 50, height 176-182
size 52, height 152-158
size 52, height 158-164
size 52, height 164-170
size 52, height 170-176
size 52, height 176-182
size 54, height 152-158
size 54, height 158-164
size 54, height 164-170
size 54, height 170-176
size 54, height 176-182
size 56, height 152-158
size 56, height 158-164
size 56, height 164-170
size 56, height 170-176
size 56, height 176-182
-

Size:

Height:

152-158
158-164
164-170
170-176
176-182

$10

After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".

Info

Comments

Questions

Pattern of a coat. Loose fit, straight lined coat with a mid-thigh length. Displaced centre fastening with two rows of buttonholes and buttons. The side seam is transferred into a seamless side piece. The front pieces are designed with two pairs of darts and two pockets. One pair of darts comes from the neckline and it is located under the lapel. The other pair of darts was drafted by combining the bust darts with the waist darts and it ends by the pocket opening seam. The jetted pockets are with welts and flaps. The left front features a chest pocket. The jetted chest pocket has a tilted opening and a welt with topstitched ends. The back is designed with a centre seam. The centre seam ends with a vent. The sleeves are set-in, long, with two seams and an open vent in the elbow seam. The lapel collar has an attached collar stand.

Eases added to a pattern, cm: Bust-line: 37,5 cm. Hips-line: 27,6 cm. Shoulders: 14,0 cm.

Garment Length Measurements, cm:

Size	38	40	42	44	46	48	50	52	54	56
Finished back length along the center back seam	77,1-82,3	77,2-87,5	77,3-87,6	77,4-87,7	77,5-87,8	77,6-87,9	77,7-88,0	77,8-88,1	77,9-88,2	78,0-88,3
Finished sleeve length	60,2-63,9	60,3-67,9	60,4-68,0	60,5-68,1	60,6-68,2	60,7-68,3	60,8-68,4	60,9-68,5	61,0-68,6	61,1-68,7

Fabric suggestion:

Main fabric. For this garment we recommend mid-weight coating fabrics, with or without nap, soft and flowy, which are easy to press (some pieces are designed with easing of their edges). The fabric can be natural, synthetic or blended.

Lining material. As a lining use the fabrics with density and plasticity suitable for the shell fabric, made out of natural, synthetic or blended fibre.

Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 39 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density. For better sewing quality, we recommend strengthening some details with a feasible facing straightener of 97 g/m2 and with the width of 90 cm.

Amount of Fabrics (in metres):

Size	38	40	42	44	46	48	50	52	54	56
Main fabric, wide 140 cm	1,95-2,05	2,00-2,20	2,05-2,25	2,10-2,35	2,15-2,35	2,20-2,40	2,25-2,45	2,30-2,50	2,35-2,60	2,35-2,60
Lining fabric, wide 140 cm	1,40-1,50	1,40-1,60	1,45-1,65	1,45-1,65	1,50-1,65	1,50-1,70	1,50-1,70	1,55-1,75	1,60-1,75	1,60-1,75
Interfacing (density 39 g/m2; width 150 cm)	1,70-1,75	1,75-1,95	1,75-1,95	1,80-2,00	1,80-2,00	1,85-2,05	1,85-2,05	1,90-2,10	1,95-2,15	2,00-2,20
Fusible facing straightener (density 97 gr/m2; width 90 cm)	0,35	0,40			0,45
Bias fusible tape with reinforcement stitches	2,55-2,60	2,60-2,75	2,65-2,80	2,70-2,85	2,75-2,90	2,80-2,95	2,85-3,00	2,90-3,05	2,95-3,10	3,00-3,15
Fusible on grain tape	3,00-3,15	3,00-3,30	3,05-3,35	3,05-3,35	3,10-3,40	3,10-3,40	3,15-3,45	3,15-3,45	3,20-3,50	3,20-3,50

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Accessories:
1.      Button 24-26 mm in diameter - 4 pcs (for the front closure).
2.      Button 16-18 mm in diameter - 8 pcs (for the vents of the sleeves).
3.      Button (inner) 15-17 mm in diameter - 1 pc.
4.      Button ((backer buttons) 10-12 mm - 4 pcs.
5.      Shoulder pads 16 mm thick - 1 pair
6.      Sleeve heads - 1 pair (optional).

Pattern is given with seam allowances.

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - "Advanced".

The photos shows a coat sewed at the GRASSER for pattern №1159.

Model is wearing a size 42. Model parameters: Bust-line: 85 cm, Waist-line: 64 cm, Hips: 93 cm, Height: 174 cm.

The photo also shows: trousers on pattern №1141, knitted jacket on pattern №728, skirt on pattern №1103, longsleeve on free pattern №110, shirt on pattern №859, trousers on pattern №1098, dress on pattern №1076, dress on pattern №1166, sweatshirt on pattern №1091, skirt on pattern №1090, dress on pattern №1170, cap on pattern №836.

For sewing you will need the following equipment:

1.      Multipurpose sewing machine;
2.      An iron with or without steam;
3.      Regular presser foot;
4.      Wooden iron;
5.      Ironing desk or console table;
6.      Hand needle for basting;
7.      Machine needles №90-100 for the main fabric;
8.      Machine needles №70-80 for the lining;
9.      Paper scissors;
10. Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter.

A test square for checking the plotter scale is located on the pattern sheet.

All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.