The photo also shows: trousers on pattern №998, longsleeve on free pattern №110, trousers on pattern №906.
Coat, pattern №1242
Loose-fitting raincoat, straight-cut, unlined. The length is below the knee. Central button closure.
Advanced level
Instructions with photo
Plotter 900 + А4/Letter
Sizes:
-
size 38-42, height 152-164
-
size 38-42, height 164-170
-
size 38-42, height 170-182
-
size 44-48, height 152-164
-
size 44-48, height 164-170
-
size 44-48, height 170-182
-
size 50-54, height 152-164
-
size 50-54, height 164-170
-
size 50-54, height 170-182
-
size 56-62, height 152-164
-
size 56-62, height 164-170
-
size 56-62, height 170-182
-
-
Size:
- 38-42
- 44-48
- 50-54
- 56-62
Height:
- 152-164
- 164-170
- 170-182
$8.80
$11
After payment, links for downloads of patterns are sent to your e-mail. For registered users download links are also available in personal account in the section "My Orders".
Info
Comments
Questions
-
A loose-fit coat with a straight silhouette, unlined, extending below the knee. Center front single-breasted closure with 8 snap buttons. On the upper part of the left front panel, there is a vertical welt pocket, finished with set-in ends and a zipper. In the lower part of the front, there are welt pockets, also with set-in ends, and flaps fastened on a single snap button. The back features a center seam. Above the hipline, the center back seam ends in an inverted box pleat, supplemented by a wedge-shaped inset which fastens with a tab secured by one buttonhole and one button. The shoulder line is dropped below the elbow level. The armhole is positioned below the waistline. The sleeves are set-in, single-seam, shirt-style, full-length, finished with cut-on turn-back cuffs. The neckline is round and finished with two collar bands: a high collar band with a snap button fastening, and a low collar band with a cut-on tab fastened with two snap buttons.
Model is wearing a size 42. Model parameters: Bust-line: 86 cm, Waist-line: 62 cm, Hips: 89 cm, Height: 173 cm. -
Bust-line: 72,0 cm + model's widening;
Hips-line: 64,0 cm.
Size 38-42 44-48 50-54 56-62 Shoulders, cm 38,5-41,7 37,7-40,9 37,1-40,3 37,3-40,5 -
Size 38-42 44-48 50-54 56-62 1/2 garment width (measured from side seam to side seam at hip level), cm А 78,0 84,0 90,0 96,0 Finished back length along the center
back seam, cmВ 106,4-116,4 106,8-116,8 107,2-117,2 107,6-117,6 Shoulder seam length from neckline to
armhole, finished, cmС 50,2-51,8 52,1-53,7 54,0-55,6 55,7-57,3 Sleeve length according to the pattern,
including cut-on cuffD 28,7-35,3 27,9-34,5 27,1-33,7 26,3-32,9
-
Main fabric. We recommend using medium-weight or lightweight suiting fabrics, lightweight trench coat or outerwear fabrics, or lightweight coat fabrics without stretch.The fabric should be soft, pliable, and drapey. Suitable fabrics may consist of natural, synthetic, or blended fibers.
Lining material. For edge binding, use lining materials that match the main fabric in pliability and weight, and are made from natural, synthetic, or blended fibers.
Interfacing materials. For better quality of sewing, we recommend to use the interfacing material. For example, you may use 33-34 g/m2 density 150 cm, width woven interfacing. The density of the interfacing material depends on the main fabric density.
-
The amount of fabric in meters.
Size 38-42 44-48 50-54 56-62 Main fabric, wide 140 cm 3,10-3,25 3,25-3,50 3,40-3,70 3,60-3,90 Lining fabric, wide 140 cm (Option 1 - for binding the edges) 0,55
Finished bias tape, wide 15 mm (Option 2 - binding for edges) 10,15-10,80 10,30-10,90 10,50-11,05 10,55-11,20 Consumption for fusible interfacing (suiting fabric) Interfacing (density 33-34 g/m2, width 150 cm) 0,65 Fusible on grain tape 2,05-2,25 2,10-2,30 2,15-2,35 2,15-2,35 Consumption for non-fusible interfacing (outwear fabric) Interfacing (density 33-34 g/m2, width 150 cm) 1,25
Attention! We give an exact fabric consumption for a tight layout scheme of the details, without the extra seam allowances for the fitting and rough cutting. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.
Accessories:
1. Button with the diameter of 14-16 mm – 1 pc.
2. Button (under button) with a diameter of 8-10 mm – 1 pc.
3. Snap button with the diameter of 12.5-15 mm – 1 pc.
4. Close-end metal zipper #3 or #4, long 18-20 cm – 1 pc. (for breast pocket).
-
- Multipurpose sewing machine;
- An iron with or without steam;
- Regular presser foot;
- Hinged cording foot;
- Wooden iron;
- Ironing desk or console table;
- Hand needle for basting;
- Machine needles #70-80;
- Paper scissors;
- Scissors for textile cutting;
- Snaps pressing machine to install accessories and press studs, depending on the diameter.
-
The pattern in your order will be in two print options:
1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew! A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.
2. For printing on a large format plotter. A test square for checking the plotter scale is located on the pattern sheet.
