Scarf, free pattern №1096

Size:

Free

Free pattern in PDF format. To download a free pattern you must log in or register

Info

Comments

Questions

Scarf pattern. An accessory – a double-sided scarf with insulation. It consists of two parts connected by a long edge, in which a hole is left for threading the opposite end of the scarf.

Garment Measurements, cm:

Size	Size 1	Size 2
Garment lenght	110,0	85,0
Garment width	24,0	20,0

Fabric suggestion:

Main fabric #1. We recommend using soft, medium density and thin raincoat and jacket fabrics for one side of this garment; raincoat fabrics with a membrane coating.

Main fabric #2. For the second side of the garment, we recommend using artificial fur with short or medium pile height; knitted fabrics with pile, with slight or no stretching; knitted fabrics of small and medium density, soft, with little electrification, made of natural, synthetic or mixed fibers, for example, fleece, knitted knitwear.

Insulation. To insulate the garment, we recommend using synthetic insulation materials of a new generation with a protective layer on both sides, for example, ISOSOFT 34 100 g/m2.

Ready-made quilted raincoat fabric can be used for sewing.

Amount of Fabrics (in metres):

Option 1. Scarf is from the main material

Size	Size 1	Size 2
Main fabric, wide 140 cm	0,65	0,55
Insulation material (100 g/m2; width 140 cm)	0,35	0,40

Attention! Given exact fabric consumption can be used only when pattern details are placed on a fabric sheet close to each other. All pattern details should be arranged on an opened fabric sheet strictly on grain in one direction, each pattern piece must be cut out only once.

Option 2. Scarf is from the main material #1 and main material #2

Size	Size 1	Size 2
Main fabric #1, wide 140 cm	0,35	0,30
Main fabric #2, wide 140 cm	0,35	0,30
Insulation material (100 g/m2; width 140 cm)	0,35	0,40

Pattern is given with seam allowances.

Detailed sewing instruction with step-by-step photos of sewing is attached to the pattern in the kit.

Degree of difficulty - "Beginner”.

The photos shows a scarf sewed at the GRASSER for pattern №1096.

Model is wearing a Size 1.

The photo also shows: cap on pattern №1095, jacket on pattern №1053, trousers on pattern №1051, turtleneck sweater on pattern №913, dress on pattern №726, vest on pattern №954, jacket pattern №1065, cardigan on pattern №1052.

For sewing you will need the following equipment:

1.       Multipurpose sewing machine;
2.       An iron with or without steam;
3.       Regular presser foot;
4.       Hinged cording foot;
5.       Wooden iron;
6.       Ironing desk or console table;
7.       Hand needle for basting;
8.       Machine needles №70-80 for the main fabric;
9.       Machine needles Stretch or Super Stretch №70 for the lining;
10.    Paper scissors;
11.    Scissors for textile cutting.

The pattern in your order will be in two print options:

1. For printing on A4/Letter. You need to print the pattern on a regular printer on A4/Letter sheets, then glue the sheets, cut the pattern and you can sew!

A test square for checking the A4/Letter print scale is located on the first sheet of the pattern file.

2. For printing on a large format plotter.

A test square for checking the plotter scale is located on the pattern sheet.

All documents, multimedia and texts posted on www.en-grasser.com are the intellectual property of GRASSER LLC. Patterns and master classes are provided to buyers for personal use. Resale of patterns and master classes is prohibited. Public offering of our products and links to their downloading - on the Internet, social networks and in the media - is a violation and carries a penalty in accordance to applicable law.